The following is an overview of the user manual for the Z-Wave product Smart Home Security (RCHS5200W,RCHS5230W)from Honeywell Home (Resideo). To view other Z-Wave products and manuals from Honeywell follow that link.
Overview
It’s simple to set up. The Camera Base Station connects to sensors, devices, and services, and comes integrated with Amazon Alexa™ and facial recognition. Whether you rent, own, or relocate regularly, Honeywell Smart Home Security is designed to adapt to your life
Security
As a Z-Wave Plus certified product, Smart Home Security supports Z-Wave S2 security. The following security modes are directly supported:
- S2 Access Control
- S2 Authenticated
- S2 Unauthenticated
Features
Honeywell describes Smart Home Security as having the following features:
- Switch Load Capacity Current
- Switch Load Capacity Watts
- Color
- IP (Ingress Protection) Rated
- Battery Quantity
- Communications Connections
- Communications Protocol
- Firmware updatable via a compatible Z-Wave gateway
- Switch Load Capacity Volt-Ampere
- Neutral Wire Required
- Sensors
- FLiRS capable
- Supports Network Wide Inclusion
- Supports Z-Wave Explorer Frames
- Supports Z-Wave SmartStart allowing you to setup the product simply by scanning its QR code via
Installation instructions
Factory reset Smart Home Security
On the Z-Wave Device Management screen, press Z-Wave Utilities. Z-Wave Utilities screen appears, Press Controller Factory Reset. Please use this procedure only when the network primary controller is missing or otherwise inoperable.
On the Z-Wave Device Management screen, press Z-Wave Utilities. Z-Wave Utilities screen appears, Press General Device Inclusion.
On the Z-Wave Device Management screen, press Z-Wave Utilities. Z-Wave Utilities screen appears, Press General Device Exclusion.
On the Z-Wave Device Management screen, press Z-Wave Utilities. Z-Wave Utilities screen appears, Press Learn.
Please note that this is a user manual Smart Home Security from Honeywell Home (Resideo) is provided as is and without warranty; all information contained herein is provided by the manufacturer or the certifying body. The information provided is for reference only and is not intended to be used as a substitute for professional advice. ZWaveProducts.com only warrants and is only able to support products purchased directly from us. If you have Smart Home Security and have not purchased it from us, please contact the manufacturer directly with any further questions you may have.