The following is an overview of the user manual for the Z-Wave product Digital Door Lock (HDL-7300SK)from HYUNDAI TELECOM. To view other Z-Wave products and manuals from Hyundai Telecom follow that link.
Overview
- Supports Z-Wave
- Touchscreen Keypad
- Push/Pull Type
Security
As a Z-Wave Plus certified product, Digital Door Lock supports Z-Wave S2 security. The following security modes are directly supported:
- S2 Access Control
Features
Hyundai Telecom describes Digital Door Lock as having the following features:
- FLiRS capable
- Supports Network Wide Inclusion
- Supports Z-Wave Explorer Frames
- Supports Z-Wave SmartStart allowing you to setup the product simply by scanning its QR code via
Installation instructions
SmartStart location
SmartStart QR code's location as follows: SmartStart enabled products can be added into a Z-Wave network by scanning
the Z-Wave QR Code present on the product with a controller providing SmartStart
inclusion. No further action is required and the SmartStart product will be added
automatically within 10 minutes of being switched on in the network vicinity.
Please Save the QR Code carefully.If both the DSK representation on the product
and any DSK provided in the product packaging were to fade,rub off or, be lost,the
device would not be able to be added to a Z-Wave network.
You can find the QR code and DSK inside of battery box.
To add or include the HDL-7300SK into a Z-Wave network
1. Set the controller in inclusion mode.
2. Open the battery cover of the indoor body and press the [REG 1] button.
3. Press the [1][4] button after pressing the [*] button.
To remove or exclude the HDL-7300SK into a Z-Wave network
1. Set the controller in exclusion mode.
2. Open the battery cover of the indoor body and press the [REG 1] button.
3. Press the [3][6] button after pressing the [*] button.
KeyPad Touch
Factory reset Digital Door Lock
To Factory Reset
1. Open the battery cover of the indoor body and press the [REG 1] button.
2. Press the [8][0] button after pressing the [*] button.
Please note that this is a user manual Digital Door Lock from HYUNDAI TELECOM is provided as is and without warranty; all information contained herein is provided by the manufacturer or the certifying body. The information provided is for reference only and is not intended to be used as a substitute for professional advice. ZWaveProducts.com only warrants and is only able to support products purchased directly from us. If you have Digital Door Lock and have not purchased it from us, please contact the manufacturer directly with any further questions you may have.