The following is an overview of the user manual for the Z-Wave product Smart Plug (3210-L)from IRIS. To view other Z-Wave products and manuals from IRIS follow that link.
As a Z-Wave Plus certified product, Smart Plug supports Z-Wave S2 security. The following security modes are directly supported:
IRIS describes Smart Plug as having the following features:
- FLiRS capable
- Supports Network Wide Inclusion
- Supports Z-Wave Explorer Frames
- Supports Z-Wave SmartStart allowing you to setup the product simply by scanning its QR code via
The Lowe's IRIS Smart Plug acts as a repeater for other Z-Wave devices.
Power off device by unplugging it from its receptacle.
Factory reset Smart Plug
Unplug device from the wall. While holding the front button, re-insert device into the receptacle. Once the blue light illuminates, release button to factory reset. Use this procedure only in the event that the network primary controller is missing or otherwise inoperable.
Please note that this is a user manual Smart Plug from IRIS is provided as is and without warranty; all information contained herein is provided by the manufacturer or the certifying body. The information provided is for reference only and is not intended to be used as a substitute for professional advice. ZWaveProducts.com only warrants and is only able to support products purchased directly from us. If you have Smart Plug and have not purchased it from us, please contact the manufacturer directly with any further questions you may have.