Smart Door Lock (iLock15) manual for Z-Wave

The following is an overview of the user manual for the Z-Wave product Smart Door Lock (iLock15)from iSurpass. To view other Z-Wave products and manuals from iSurpass follow that link.

  1. Overview
  2. Security
  3. Features
  4. Installation instructions


Smart Door Lock
SKU Code
The iSurpass Smart Door Lock provides more convenience to secure your home. It supports passwords, key and remote lock/unlock. It's a Z-Wave product and compatible with all Z-Wave networks. Any third party manufacturer controller can include/exclude this lock. Use in conjunction with a Security Enabled Z-Wave Controller to fully utilize all implemented functions.
Version #
HW: 1 FW: 4.01:01.01 was the version certified
Certification #
Z-Wave Version


As a Z-Wave Plus certified product, Smart Door Lock supports Z-Wave S2 security. The following security modes are directly supported:

  • S2 Access Control


iSurpass describes Smart Door Lock as having the following features:

  • Door Lock Type
  • Battery powered using AA batteries
  • Battery Quantity
  • FLiRS capable
  • Supports Network Wide Inclusion
  • Supports Z-Wave Explorer Frames
  • Supports Z-Wave SmartStart allowing you to setup the product simply by scanning its QR code via

Installation instructions

1)Set gateway in exclusion .
2)Set door lock in learn mode.
press reset button -> input admin password + # -> press 0
3)Wait until success.

1)Set gateway in Inclusion.
2)Set door lock in learn mode.
press reset button -> input admin password + # -> press 0
3)Wait until success.

Factory reset Smart Door Lock

User should reset device for safety when receiving lock first or if forget the password or if lost card. The reset way : hold the reset button about 7s, when hear “Di“ sound, then release the button, door lock will be reset. Factory default reset will reset all user (password and card) and home ID and device ID (about Z-Wave function), so be carefully to do reset. The default admin password is 123456 .
Please use this procedure only when the network primary controller is missing or otherwise inoperable.

Please note that this is a user manual Smart Door Lock from iSurpass is provided as is and without warranty; all information contained herein is provided by the manufacturer or the certifying body. The information provided is for reference only and is not intended to be used as a substitute for professional advice. only warrants and is only able to support products purchased directly from us. If you have Smart Door Lock and have not purchased it from us, please contact the manufacturer directly with any further questions you may have.