The following is an overview of the user manual for the Z-Wave product In-Wall Smart Dimmer (1000W) (14326)from Jasco Products Company. To view other Z-Wave products and manuals from Jasco follow that link.
Overview
Z-Wave is the world’s largest ecosystem of interoperable smart home products. Z-Wave lighting controls provide an easy-to-install and affordable system to control lighting and small appliances in your home. Add GE Z-Wave lighting controls to a Z-Wave certified gateway to access and control your home from anywhere in the world using your smartphone, tablet or computer as a home automation command center. Never worry if you accidentally left the lights on because you can turn them off remotely or program your lights to go on/off at specific times. Create customized lighting scenes for any occasion such as a “go to sleep” scene or a “movie night” scene. Give the illusion that someone is home by programming the lights to turn on/off while you are away—perfect for deterring crime and adding additional security!"
Security
As a Z-Wave Plus certified product, In-Wall Smart Dimmer (1000W) supports Z-Wave S2 security. The following security modes are directly supported:
Features
Jasco describes In-Wall Smart Dimmer (1000W) as having the following features:
- FLiRS capable
- Supports Network Wide Inclusion
- Supports Z-Wave Explorer Frames
- Supports Z-Wave SmartStart allowing you to setup the product simply by scanning its QR code via
Installation instructions
Adding your device to a Z-wave network
1. Follow the instructions for your Z-wave certified controller to include a device to the Z-wave
network.
2. Once the controller is ready to include your device, press and release the top or bottom of the
wireless smart switch(rocker) to include it in the network.
3. Once your controller has confirmed that the device has been included, refresh the Z-wave network
to optimize performance.
Please reference the controller’s manual for instructions.
Now you have complete control to turn your fixture ON/OFFaccording to groups, scenes, schedules
and interactive automations programmed by your controller.
If your Z-wave certified controller features Remote Access, you can now control your fixture from
your mobile devices.
1. Follow the instructions for your Z-wave certified controller to exclude a device from the Z-wave
network.
2. Once the controller is ready to Exclude your device, press and release the top or bottom of the
wireless smart dimmer (rocker) to exclude it from the network.
Factory reset In-Wall Smart Dimmer (1000W)
To return your switch to factory defaults:
Quickly press ON (Top) button three (3) times then immediately press the OFF (Bottom) button three
(3) times. The LED will flash ON/OFF 5 times when completed successfully.
Note: This should only be used in the event your networks’ primary controller is
missing or otherwise inoperable.
Please note that this is a user manual In-Wall Smart Dimmer (1000W) from Jasco Products Company is provided as is and without warranty; all information contained herein is provided by the manufacturer or the certifying body. The information provided is for reference only and is not intended to be used as a substitute for professional advice. ZWaveProducts.com only warrants and is only able to support products purchased directly from us. If you have In-Wall Smart Dimmer (1000W) and have not purchased it from us, please contact the manufacturer directly with any further questions you may have.