Categories

Aeotec

Atrim

SmartThings

Z-Wave Products

In-Wall Smart Dimmer (14321 (ZW3005)) manual for Z-Wave

The following is an overview of the user manual for the Z-Wave product In-Wall Smart Dimmer (14321 (ZW3005))from Jasco Products Company. To view other Z-Wave products and manuals from Jasco follow that link.

  1. Overview
  2. Security
  3. Features
  4. Installation instructions

Overview

Name
In-Wall Smart Dimmer
SKU Code
14321 (ZW3005)
Description
Transform any home into a smart home with the Jasco Z-Wave Wireless Lighting Control Dimmer Switch. The Jasco Z-Wave Wireless Lighting Control Dimmer Switch enables wireless control of on/off and dim functions of hard-wired dimmable LED/CFL and incandescent lighting. The dimmer switch replaces your current light switch, uses your existing wiring, and provides Z-Wave wireless and in-wall control of overhead lighting. Use the dimmer feature to customize the lighting output and create the perfect ambiance for any room. Providing ultimate flexibility, the Jasco Z-Wave Wireless Lighting Control Dimmer Switch allows you to operate the switch by itself or easily integrate the switch with two-way, three-way or four-way wiring configurations by adding the Jasco Auxiliary switch for Z-Wave. Two-way wiring configuration turns the light or appliance on/off from one location. Three-way wiring configuration turns the light or appliance on/off from two separate locations. Four-way wiring configuration turns the light or appliance on/off from three separate locations. The Jasco Auxiliary Switch for Z-Wave is required for three-way or four-way installations. The dimmer switch includes an LED indicator light to easily locate the switch in a dark room. Take control of your home lighting with Jasco Z-Wave Wireless Lighting Controls!
Version #
HW: 255 was the version certified
Certification #
ZC10-15030005
Certified
2015-03-18T06:04:32.46
Z-Wave Version
6.51.06

Security

As a Z-Wave Plus certified product, In-Wall Smart Dimmer supports Z-Wave S2 security. The following security modes are directly supported:

    Features

    Jasco describes In-Wall Smart Dimmer as having the following features:

    • FLiRS capable
    • Supports Network Wide Inclusion
    • Supports Z-Wave Explorer Frames
    • Supports Z-Wave SmartStart allowing you to setup the product simply by scanning its QR code via

    Installation instructions

    1. Follow the instructions for your Z-wave certified controller to exclude a device from the Z-wave network.
    2. Once the controller is ready to Exclude your device, press and release the top or bottom of the wireless smart switch(rocker) to exclude it from the network.

    1. Follow the instructions for your Z-wave certified controller to include a device to the Z-wave network.
    2. Once the controller is ready to include your device, press and release the top or bottom of the wireless smart switch(rocker) to include it in the network.
    3. Once your controller has confirmed that the device has been included, refresh the Z-wave network to optimize performance.

    Factory reset In-Wall Smart Dimmer

    1. Quickly press ON (Top) button three (3) times then immediately press the OFF (Bottom) button three (3) times. The LED will flash ON/OFF 5 times when completed successfully.
    Note: This should only be used in the event your networks primary controller is missing or otherwise inoperable.

    Please note that this is a user manual In-Wall Smart Dimmer from Jasco Products Company is provided as is and without warranty; all information contained herein is provided by the manufacturer or the certifying body. The information provided is for reference only and is not intended to be used as a substitute for professional advice. ZWaveProducts.com only warrants and is only able to support products purchased directly from us. If you have In-Wall Smart Dimmer and have not purchased it from us, please contact the manufacturer directly with any further questions you may have.