The following is an overview of the user manual for the Z-Wave product In-Wall Smart Dimmer (White Toggle) (14322)from Jasco Products Company. To view other Z-Wave products and manuals from Jasco follow that link.
Overview
Z-Wave is the world’s largest ecosystem of interoperable smart home products. Z-Wave lighting controls provide an easy-to-install and affordable system to control lighting and small appliances in your home. Add GE Z-Wave lighting controls to a Z-Wave certified gateway to access and control your home from anywhere in the world using your smartphone, tablet or computer as a home automation command center. Never worry if you accidentally left the lights on because you can turn them off remotely or program your lights to go on/off at specific times. Create customized lighting scenes for any occasion such as a “go to sleep” scene or a “movie night” scene. Give the illusion that someone is home by programming the lights to turn on/off while you are away—perfect for deterring crime and adding additional security!"
Security
As a Z-Wave Plus certified product, In-Wall Smart Dimmer (White Toggle) supports Z-Wave S2 security. The following security modes are directly supported:
Features
Jasco describes In-Wall Smart Dimmer (White Toggle) as having the following features:
- FLiRS capable
- Supports Network Wide Inclusion
- Supports Z-Wave Explorer Frames
- Supports Z-Wave SmartStart allowing you to setup the product simply by scanning its QR code via
Installation instructions
To exclude and reset the device
1. Follow the instructions for your Z-wave certified controller to exclude a device from
the Z-wave network.
2. Once the controller is ready to Exclude your device, press up and release on the
toggle to exclude it from the network.
Adding your device to a Z-wave network:
1. Follow the instructions for your Z-wave certified controller to include a device to
the Z-wave network.
2. Once the controller is ready to include your device, press up and release on the
toggle to include it in the network.
3. Once your controller has confirmed that the device has been included, refresh
the Z-wave network to optimize performance.
Please reference the controller’s manual for instructions.
Now you have complete control to turn your fixture ON/OFF or dim
according to groups, scenes, schedules and interactive automations
programmed by your controller.
If your Z-wave certified controller features Remote Access, you can now control
your fixture from your mobile devices.
Factory reset In-Wall Smart Dimmer (White Toggle)
To return your switch to factory defaults:
1. Quickly press ON (Up) button three (3) times then immediately press the OFF
(Down) button three (3) times. Note: This should only be used in the event your
network’s primary controller is missing or otherwise inoperable.
Please note that this is a user manual In-Wall Smart Dimmer (White Toggle) from Jasco Products Company is provided as is and without warranty; all information contained herein is provided by the manufacturer or the certifying body. The information provided is for reference only and is not intended to be used as a substitute for professional advice. ZWaveProducts.com only warrants and is only able to support products purchased directly from us. If you have In-Wall Smart Dimmer (White Toggle) and have not purchased it from us, please contact the manufacturer directly with any further questions you may have.