Digital Mortise Door Lock (KA211) manual for Z-Wave

The following is an overview of the user manual for the Z-Wave product Digital Mortise Door Lock (KA211)from Kaadas. To view other Z-Wave products and manuals from Kaadas follow that link.

  1. Overview
  2. Security
  3. Features
  4. Installation instructions


Digital Mortise Door Lock
SKU Code
Lock and unlock your door anywhere and anytime by integrate your lock into your Z-Wave™ home automation or security system for ultimate convenience.
Version #
HW: 199 FW: 01.04:01.27 was the version certified
Certification #
Z-Wave Version


As a Z-Wave Plus certified product, Digital Mortise Door Lock supports Z-Wave S2 security. The following security modes are directly supported:

  • S2 Access Control


Kaadas describes Digital Mortise Door Lock as having the following features:

  • FLiRS capable
  • Supports Network Wide Inclusion
  • Supports Z-Wave Explorer Frames
  • Supports Z-Wave SmartStart allowing you to setup the product simply by scanning its QR code via

Installation instructions

SmartStart location

SmartStart QR code's location as follows: You may find the DSK on individual package of each product.

1. Enter master mode(input ** + Master PIN Code + #)
2. Input "0" to enter "Network settings"
3. Input "1 + #" to enter "Include mode"

1. Enter master mode(input ** + Master PIN Code + #)
2. Input "0" to enter "Network settings"
3. Input "2 + #" to enter "Exclusion mode"

Factory reset Digital Mortise Door Lock

1. Operations on lock
1) Keep your lock in "unlock" status.
2) Use the provided reset pin to press and hold the reset button for more than 5 seconds until hearing beep sound.
3) If reset is successful, the bolt will extend on its own to learn the orientation of the door.
2. Please use this procedure only when the network primary controller is missing or otherwise inoperable.

Please note that this is a user manual Digital Mortise Door Lock from Kaadas is provided as is and without warranty; all information contained herein is provided by the manufacturer or the certifying body. The information provided is for reference only and is not intended to be used as a substitute for professional advice. only warrants and is only able to support products purchased directly from us. If you have Digital Mortise Door Lock and have not purchased it from us, please contact the manufacturer directly with any further questions you may have.