The following is an overview of the user manual for the Z-Wave product Wi-Fi Gateway (HSI01(KTS32))from KDDI CORPORATION. To view other Z-Wave products and manuals from Kddi Corporation follow that link.
Overview
This also has the following features.
- Wi-Fi feature as 802.11b/g/n station.
- Number of USB ports: USB2.0 x 1 port.
- WPS button for Wi-Fi initial setting.
- Reset button for initialize all setting.
- 3 types of LED for display its status.
Security
As a Z-Wave Plus certified product, Wi-Fi Gateway supports Z-Wave S2 security. The following security modes are directly supported:
Features
Kddi Corporation describes Wi-Fi Gateway as having the following features:
- Color
- Communications Protocol
- Firmware updatable via a compatible Z-Wave gateway
- Gateway Has Preferred Partners
- Sensors
- Supported Notification Types
- FLiRS capable
- Supports Network Wide Inclusion
- Supports Z-Wave Explorer Frames
- Supports Z-Wave SmartStart allowing you to setup the product simply by scanning its QR code via
Installation instructions
It is to select the kinds of device by Smartphone application, and it induces to push down the program switch of device.
It described on uploaded manual in Japanese.
It is page 2 (Inclusion).
It is to select the kinds of device by Smartphone application, and it induces to push down the program switch of device.
It described on uploaded manual in Japanese.
It is page 8 (Exclusioin).
KDDI is a JP telco and they are service provider.
On End-user UI, “Learn mode” functionality is not included and this is declared in the certification form already.
Factory reset Wi-Fi Gateway
It is to push the RESET button for 10 seconds.
It described on uploaded manual in Japanese.
It is Page 11 (Reset).
The statement below also described on manual in Japanese.
""If this controller is the primary controller for your network, resetting it will result in the nodes in your network being orphaned and it will be necessary after the reset to exclude and re-include all of the nodes in the network. If this controller is being used as a secondary controller in the network, use this procedure to reset this controller only
in the event that the network primary controller is missing or otherwise inoperable.""
Please note that this is a user manual Wi-Fi Gateway from KDDI CORPORATION is provided as is and without warranty; all information contained herein is provided by the manufacturer or the certifying body. The information provided is for reference only and is not intended to be used as a substitute for professional advice. ZWaveProducts.com only warrants and is only able to support products purchased directly from us. If you have Wi-Fi Gateway and have not purchased it from us, please contact the manufacturer directly with any further questions you may have.