The following is an overview of the user manual for the Z-Wave product LED Light (KHEZ-0001)from KUMHO ELECTRIC, INC. To view other Z-Wave products and manuals from Kumho Electric follow that link.
Overview
After install household lighting in a room. you can control of turn on/off LED lighting from inside and outside, also control brightness and color temperature of lamp for variety of moods.
Use extra Gateway for control operation the above function.
Security
As a Z-Wave Plus certified product, LED Light supports Z-Wave S2 security. The following security modes are directly supported:
Features
Kumho Electric describes LED Light as having the following features:
- FLiRS capable
- Supports Network Wide Inclusion
- Supports Z-Wave Explorer Frames
- Supports Z-Wave SmartStart allowing you to setup the product simply by scanning its QR code via
Installation instructions
You can add the device by either hardware button.
-hardware button : Press the Add/Remove button.(1Second)
1. Click an [Add] icon in Z-Wave PC Controller Program
2. Press the hardware button in a Kumho light lamp for 1 second
3. The device will be added to the Z-Wave network
You can remove the devicee by either hardware button.
-hardware button : Press the Add/Remove button.(1Second)
1. Click a [Remove] icon in Z-Wave PC Controller Program
2. Press the hardware button in a Kumho light lamp for 1 second
3. The device will be removed from the Z-Wave network
Factory reset LED Light
""Use this procedure only when the network primary controller is missing or otherwise inoperable.""
1. Press the hardware button in a Kumho light lamp for 10 seconds
2. Device Reset Locally notification will be sent
Please note that this is a user manual LED Light from KUMHO ELECTRIC, INC is provided as is and without warranty; all information contained herein is provided by the manufacturer or the certifying body. The information provided is for reference only and is not intended to be used as a substitute for professional advice. ZWaveProducts.com only warrants and is only able to support products purchased directly from us. If you have LED Light and have not purchased it from us, please contact the manufacturer directly with any further questions you may have.