Categories

Aeotec

Atrim

SmartThings

Z-Wave Products

A60 Led Bulb Rgbw (6VA-A806ST-Q1G) manual for Z-Wave

The following is an overview of the user manual for the Z-Wave product A60 Led Bulb Rgbw (6VA-A806ST-Q1G)from LEEDARSON. To view other Z-Wave products and manuals from Leedarson follow that link.

  1. Overview
  2. Security
  3. Features
  4. Installation instructions

Overview

Name
A60 LED BULB RGBW
SKU Code
6VA-A806ST-Q1G
Description
Our RGBW bulb has three functional categories: Good, Better and Best. Good is your basic On, Off and Dim. Using your app and controller/gateway, you can turn your lights on, off and dim them down to 5% brightness from anywhere in the world, using your smartphone. At 2700K and 800 lumens, it is a true 60W equivalent. At Better, this is where the innovative technology takes over. You get your basic On, Off and Dim, but now you have the ability to tune the white color from a warm 1800K to a cool 6500K. The ability to tune the white is what we call Tunable White, or TW. The last functional category is Best. With Best, not only do you get On, Off, Dim, and Tunable White, but now we add the colors of Red, Green and Blue. This lighting is what we call RGBW. With Leedarson’s RGBW bulbs, you will get full, saturated colors that are true Reds, true Greens and true Blues. Having this capability allows combinations of 16 Million colors.
With all of our lighting, and the app that supports it, you can group lights together, set different lighting scenes for different groups and set schdules to autotmatically turns lights, and groups, on and off. Automatically turning your lights on and off when you’re away, gives the impression you are actually home and this will help deter unwanted entry.
Version #
HW: 255 FW: 2.00 was the version certified
Certification #
ZC10-17065650
Certified
2017-06-08T14:22:44.387179
Z-Wave Version
6.51.09

Security

As a Z-Wave Plus certified product, A60 Led Bulb Rgbw supports Z-Wave S2 security. The following security modes are directly supported:

    Features

    Leedarson describes A60 Led Bulb Rgbw as having the following features:

    • Firmware updatable via a compatible Z-Wave gateway
    • Communications Protocol
    • FLiRS capable
    • Supports Network Wide Inclusion
    • Supports Z-Wave Explorer Frames
    • Supports Z-Wave SmartStart allowing you to setup the product simply by scanning its QR code via

    Installation instructions

    1. Screw the RGBW bulb into a standard E27 socket.
    2. Turn on the bulb with your wall switch to apply power to the bulb.
    a) If you’re not using a wall switch, then use your alternate method to apply power to the bulb.
    3. Activate the “included/excluded” mode on your Z-Wave controller or gateway.
    a) This may also be done through your associated app, if your ecosystem has that capability.
    4. Toggle the wall-switch, from OFF, then to ON.
    a) Or use your alternate method to toggle power from OFF, then to ON.
    5. The LED bulb will flash once if it has been successfully “included/ excluded” into your Z-Wave network.

    Note: If you are using 3rdparty Z-Wave Controller or Gateway, please refer to 3rdParty’s instruction on how to add a new device to your network.
    Note 2: If the bulb will not join the network after repeated attempts, please use the Factory Reset procedures to clear the bulb’s settings.

    1. Screw the RGBW bulb into a standard E27 socket.
    2. Turn on the bulb with your wall switch to apply power to the bulb.
    a) If you’re not using a wall switch, then use your alternate method to apply power to the bulb.
    3. Activate the “included/excluded” mode on your Z-Wave controller or gateway.
    a) This may also be done through your associated app, if your ecosystem has that capability.
    4. Toggle the wall-switch, from OFF, then to ON.
    a) Or use your alternate method to toggle power from OFF, then to ON.
    5. The LED bulb will flash once if it has been successfully “included/ excluded” into your Z-Wave network.

    Note: If you are using 3rdparty Z-Wave Controller or Gateway, please refer to 3rdParty’s instruction on how to add a new device to your network.
    Note 2: If the bulb will not join the network after repeated attempts, please use the Factory Reset procedures to clear the bulb’s settings.

    Factory reset A60 Led Bulb Rgbw

    Physically switch the bulb on and off six (6) times for intervals of 0.5-2 seconds. After the 6th time, the bulb will flash twice indicating that it’s successfully reset.A factory default is performed when the bulb is excluded from the Z-Wave network.
    Please use this procedure only when the network primary controller is missing or otherwise inoperable.

    Please note that this is a user manual A60 Led Bulb Rgbw from LEEDARSON is provided as is and without warranty; all information contained herein is provided by the manufacturer or the certifying body. The information provided is for reference only and is not intended to be used as a substitute for professional advice. ZWaveProducts.com only warrants and is only able to support products purchased directly from us. If you have A60 Led Bulb Rgbw and have not purchased it from us, please contact the manufacturer directly with any further questions you may have.