The following is an overview of the user manual for the Z-Wave product Bypass Door Window Sensor Z-Wave 700 (7AA-SS-VE-A0)from LEEDARSON. To view other Z-Wave products and manuals from Leedarson follow that link.
Overview
Security
As a Z-Wave Plus certified product, Bypass Door Window Sensor Z-Wave 700 supports Z-Wave S2 security. The following security modes are directly supported:
- S2 Authenticated
- S2 Unauthenticated
Features
Leedarson describes Bypass Door Window Sensor Z-Wave 700 as having the following features:
- FLiRS capable
- Supports Network Wide Inclusion
- Supports Z-Wave Explorer Frames
- Supports Z-Wave SmartStart allowing you to setup the product simply by scanning its QR code via
Installation instructions
pls chekc the user manual on page 9
NA
SmartStart location
SmartStart QR code's location as follows: on the side of product
1. Power on your Door Sensor, set your Z-Wave controller into add/inclusion mode.
2. Trigger this action
3. LED will flash green during the inclusion, and then solid green for 2 seconds to indicate the inclusion is successful, otherwise the LED will solid red for 2 seconds in which you need to repeat the process form step 2
1. Power on your Door Sensor, and let the Z-Wave primary controller into remove/exclusion mode.
2. Trigger this action.
3. LED will flash red during the exclusion, and then solid red for 2 seconds to indicate that the exclusion is successful, otherwise the LED will solid green for 2 seconds in which you need to repeat the process form step 2.
On the network: Send Wake up notification, and LED will fast blink green during sending data.
Factory reset Bypass Door Window Sensor Z-Wave 700
Reset Door Sensor to factory default.
LED will blink red faster and faster within 5 seconds and then keep solid red until the button is released. Device will reset itself to factory default by sending a “Device Reset Locally Notification” to gateway when the button is released.
Please note that this is a user manual Bypass Door Window Sensor Z-Wave 700 from LEEDARSON is provided as is and without warranty; all information contained herein is provided by the manufacturer or the certifying body. The information provided is for reference only and is not intended to be used as a substitute for professional advice. ZWaveProducts.com only warrants and is only able to support products purchased directly from us. If you have Bypass Door Window Sensor Z-Wave 700 and have not purchased it from us, please contact the manufacturer directly with any further questions you may have.