The following is an overview of the user manual for the Z-Wave product Smart Plug (SPD-01A)from LG Uplus. To view other Z-Wave products and manuals from LG follow that link.
Overview
So, This Device will inform you of the electricity usage of your load.
Security
As a Z-Wave Plus certified product, Smart Plug supports Z-Wave S2 security. The following security modes are directly supported:
Features
LG describes Smart Plug as having the following features:
- FLiRS capable
- Supports Network Wide Inclusion
- Supports Z-Wave Explorer Frames
- Supports Z-Wave SmartStart allowing you to setup the product simply by scanning its QR code via
Installation instructions
After mounting the UZB controller to your PC and run the PC Controller program you can click the Remove button in the PC Controller program. If being connected PC controller, Press the button on the Smart Plug for more than five seconds after you plug the Smart Plug into a power outlet, Plug will Exclusion in the controller, while the flashing button LED on the Smart Plug.
After mounting the UZB controller to your PC and running the PC Controller program, click the Add button in the PC Controller program. Press the button on the Smart Plug for more than five seconds after you plug the Smart Plug into a power outlet and it will include to the network controller, while flashing the button LED on the Smart Plug.
Factory reset Smart Plug
Press the button on the Smart Plug for more than 10 seconds after you plug the Smart Plug into a power outlet will Exclusion in the network controller, Press the button of Smart Plug with your finger to 10 or more seconds continuously and if you take your finger off when the LED blinking of the device is in the Product Reset. And Device Status are initialized.
※ Please use this procedure only in the event that the network primary
controller is missing or otherwise inoperable
Please note that this is a user manual Smart Plug from LG Uplus is provided as is and without warranty; all information contained herein is provided by the manufacturer or the certifying body. The information provided is for reference only and is not intended to be used as a substitute for professional advice. ZWaveProducts.com only warrants and is only able to support products purchased directly from us. If you have Smart Plug and have not purchased it from us, please contact the manufacturer directly with any further questions you may have.