Categories

Aeotec

Atrim

SmartThings

Z-Wave Products

Smart Station (LS090WH) manual for Z-Wave

The following is an overview of the user manual for the Z-Wave product Smart Station (LS090WH)from LifeSmart. To view other Z-Wave products and manuals from LifeSmart follow that link.

  1. Overview
  2. Security
  3. Features
  4. Installation instructions

Overview

Name
Smart Station
SKU Code
LS090WH
Description
LifeSmart Smart Station connects LifeSmart home automation devices with each other wirelessly. It allows users to monitor, control and automate home environment remotely from mobile devices. It helps you to care of your loves ones 24hrs even when you are away. Any unscheduled changes, like someone entering your house unannounced, you will be informed instantly.
Version #
HW: 1 FW: 1.01:01.01:00.00 was the version certified
Certification #
ZC10-19046428
Certified
2019-04-17T16:27:36.210922
Z-Wave Version
6.81.04

Security

As a Z-Wave Plus certified product, Smart Station supports Z-Wave S2 security. The following security modes are directly supported:

  • S2 Access Control
  • S2 Authenticated
  • S2 Unauthenticated

Features

LifeSmart describes Smart Station as having the following features:

  • Communications Protocol
  • Communications Connections
  • Firmware updatable via a compatible Z-Wave gateway
  • Gateway Has Preferred Partners
  • Color
  • FLiRS capable
  • Supports Network Wide Inclusion
  • Supports Z-Wave Explorer Frames
  • Supports Z-Wave SmartStart allowing you to setup the product simply by scanning its QR code via

Installation instructions

1. Click ‘+’ on the homepage
2. Choose 'Add Device' option
3. Choose 'Learn' option

1. Click ‘+’ on the homepage
2. Choose 'Add Device' option
3. Choose 'Add' option
4. Wait for adding or click 'Cancel' to abort process
5. Choose Security level
6. Input DSK code
7. Input customized device name and assign group
8. Device is displayed on the homepage of App

1. Choose the device you would like to exclude on the homepage of App
2. Choose'…' on the upper-right corner
3. Choose 'Remove' option

Factory reset Smart Station

1. Click ‘+’ on the homepage
2. Choose 'Add Device' option
3. Choose 'Reset' option
If this controller is the primary controller for your network, resetting it will result in the nodes in your network being orphaned and it will be necessary after the reset to exclude and re-include all of the nodes in the network. If this controller is being used as a secondary controller in the network, use this procedure to reset this controller only in the event that the network primary controller is missing or otherwise inoperable.

Please note that this is a user manual Smart Station from LifeSmart is provided as is and without warranty; all information contained herein is provided by the manufacturer or the certifying body. The information provided is for reference only and is not intended to be used as a substitute for professional advice. ZWaveProducts.com only warrants and is only able to support products purchased directly from us. If you have Smart Station and have not purchased it from us, please contact the manufacturer directly with any further questions you may have.