The following is an overview of the user manual for the Z-Wave product 1 Gang Touch Panel Switch (LM-S1ZW)from LUMI. To view other Z-Wave products and manuals from LUMI follow that link.
Overview
a simple design compounded by tempered glass and capacitive
touch, Lumi's devices will make your home become more elegant,
modern and luxurious.
Security
As a Z-Wave Plus certified product, 1 Gang Touch Panel Switch supports Z-Wave S2 security. The following security modes are directly supported:
- S2 Authenticated
- S2 Unauthenticated
Features
LUMI describes 1 Gang Touch Panel Switch as having the following features:
- Switch Type
- FLiRS capable
- Supports Network Wide Inclusion
- Supports Z-Wave Explorer Frames
- Supports Z-Wave SmartStart allowing you to setup the product simply by scanning its QR code via
Installation instructions
SmartStart location
SmartStart QR code's location as follows: - QR code with Pin code on the backside of the product
- QR code with DSK string on the product box
1. Put the controller into ADD device mode. Follow the instructions provided by the
controller manufacturer.
2. Touch and hold any key on the panel for more than 5 seconds. All indication lights will
blinks in blue. At this point release the key, the touch panel will start inclusion
process.
1. Put the controller into REMOVE device mode. Follow the instructions provided by the
controller manufacturer.
2. Touch and hold any key on the panel for more than 5 seconds. All indication lights will
blinks blue in color. At this point release the key, the touch panel will start
exclusion process.
Factory reset 1 Gang Touch Panel Switch
Press the config button 5 times, Indication LEDs lights will blinks red in color, touch
panel will start local reset. Touch panel switch will erase network inclusion state
after local reset.
Please note that this is a user manual 1 Gang Touch Panel Switch from LUMI is provided as is and without warranty; all information contained herein is provided by the manufacturer or the certifying body. The information provided is for reference only and is not intended to be used as a substitute for professional advice. ZWaveProducts.com only warrants and is only able to support products purchased directly from us. If you have 1 Gang Touch Panel Switch and have not purchased it from us, please contact the manufacturer directly with any further questions you may have.