The following is an overview of the user manual for the Z-Wave product MyAlert (MyAlert001)from M2M Solution. To view other Z-Wave products and manuals from M2M Solution follow that link.
Overview
this is white lable gateway easily customizable to corporate needs.
it can embedded 3G, 4G connectivity, Wifi, Bluetooth, Battery back-up, siren, Microphone and speaker.
Security
As a Z-Wave Plus certified product, MyAlert supports Z-Wave S2 security. The following security modes are directly supported:
Features
M2M Solution describes MyAlert as having the following features:
- FLiRS capable
- Supports Network Wide Inclusion
- Supports Z-Wave Explorer Frames
- Supports Z-Wave SmartStart allowing you to setup the product simply by scanning its QR code via
Installation instructions
We have to go on the Graphical user interface and click on the exclude accessory section linked to the sensor we want to remove. Once done the system will tell the end user the device has been well excluded.
We can manage the process through the Graphical USER Interface.
Option 1: The image of the product has been integrated into our GUI and we need to click on it then we need to push the inclusion button. Once done the system will tell the end user the device has been well added.
Option 2: The image of the product is not available and the user will have to click on the icon 'Other Zwave sensor' then push the inclusion button. Once done the system will tell the end user the device has been well added.
Factory reset MyAlert
On the GUI, we need to go to the Advanced setting screen then on Zwave configuration then push the 'reset' button.
Please note that this is a user manual MyAlert from M2M Solution is provided as is and without warranty; all information contained herein is provided by the manufacturer or the certifying body. The information provided is for reference only and is not intended to be used as a substitute for professional advice. ZWaveProducts.com only warrants and is only able to support products purchased directly from us. If you have MyAlert and have not purchased it from us, please contact the manufacturer directly with any further questions you may have.