The following is an overview of the user manual for the Z-Wave product IoT home-manager hub (LAN type) (MC01-507L)from Mercury. To view other Z-Wave products and manuals from Mercury follow that link.
Overview
Security
As a Z-Wave Plus certified product, IoT home-manager hub (LAN type) supports Z-Wave S2 security. The following security modes are directly supported:
Features
Mercury describes IoT home-manager hub (LAN type) as having the following features:
- Color
- Supported Notification Types
- FLiRS capable
- Supports Network Wide Inclusion
- Supports Z-Wave Explorer Frames
- Supports Z-Wave SmartStart allowing you to setup the product simply by scanning its QR code via
Installation instructions
①Press a push button for more than 5 seconds
②If remove process in progress,IoT Device LED is blinking
③When remove is complete, IoT Device LED is off
※ When you want to cancel remove process, Press a push button one time
①Press a push button one time
②If add process in progress,IoT Device LED is blinking
③When add process is successful, IoT Device LED is on
※ When you want to cancel add process, Press a push button one time
①Select [ Controller Learn Mode Request ] command
②Click [ Kafka Send ] button
③Enter parameter value [ 5 ]
④Click [ Confirm ] button
Factory reset IoT home-manager hub (LAN type)
①Press a reset button until all LEDs are off about more than 20 seconds
②Automatically reboot
""Please use this procedure only when the network primary controller is missing or otherwise inoperable.""
Please note that this is a user manual IoT home-manager hub (LAN type) from Mercury is provided as is and without warranty; all information contained herein is provided by the manufacturer or the certifying body. The information provided is for reference only and is not intended to be used as a substitute for professional advice. ZWaveProducts.com only warrants and is only able to support products purchased directly from us. If you have IoT home-manager hub (LAN type) and have not purchased it from us, please contact the manufacturer directly with any further questions you may have.