The following is an overview of the user manual for the Z-Wave product IoT Home Manager Hub(USB Type) (MC02-612ZD)from Mercury. To view other Z-Wave products and manuals from Mercury follow that link.
Overview
Security
As a Z-Wave Plus certified product, IoT Home Manager Hub(USB Type) supports Z-Wave S2 security. The following security modes are directly supported:
Features
Mercury describes IoT Home Manager Hub(USB Type) as having the following features:
- Color
- Supported Notification Types
- Gateway Has Preferred Partners
- FLiRS capable
- Supports Network Wide Inclusion
- Supports Z-Wave Explorer Frames
- Supports Z-Wave SmartStart allowing you to setup the product simply by scanning its QR code via
Installation instructions
Using the Emulator
1. Open the Emulator
2. Set Device Information
3. Select Learn mode Command
4. Click Send button
1. Press a push button for more than 5 seconds
2. If exclude process in progress, Z-Wave LED is blinking
3. When exclude process in successful, Z-Wave LED is off
1. Press a push button one time
2. If include process in progress, Z-Wave LED is blinking
3. When include process in successful, Z-Wave LED is solid
Factory reset IoT Home Manager Hub(USB Type)
If this controller is the primary controller for your network, resetting it will result in the nodes in your network being orphaned and it will be necessary after the reset to exclude and re-include all of the nodes in the network. If this controller is being used as a secondary controller in the network, use this procedure to reset this controller only in the event that the network primary controller is missing or otherwise inoperable.
1. Press a reset button until All LEDs are off
2. Automatically reboot
Please note that this is a user manual IoT Home Manager Hub(USB Type) from Mercury is provided as is and without warranty; all information contained herein is provided by the manufacturer or the certifying body. The information provided is for reference only and is not intended to be used as a substitute for professional advice. ZWaveProducts.com only warrants and is only able to support products purchased directly from us. If you have IoT Home Manager Hub(USB Type) and have not purchased it from us, please contact the manufacturer directly with any further questions you may have.