Categories

Aeotec

Atrim

SmartThings

Z-Wave Products

Z-Wave Outdoor Smart Plug (MP22Z) manual for Z-Wave

The following is an overview of the user manual for the Z-Wave product Z-Wave Outdoor Smart Plug (MP22Z)from Minoston. To view other Z-Wave products and manuals from Minoston follow that link.

  1. Overview
  2. Security
  3. Features
  4. Installation instructions

Overview

Name
Z-Wave Outdoor Smart Plug
SKU Code
MP22Z
Description
This product can be operated in any Z-Wave network with other Z-Wave certified devices from other manufacturers. All non-battery operated nodes within the network will act as repeaters regardless of vendor to increase reliability of the network.Each module is designed to act as a repeater,which will re-transmit a radio frequency (RF) signal by routing the signal ,around obstacles and radio dead spots to ensure that the signal is received at its intended destination.
Version #
HW: 255 FW: 1.255 was the version certified
Certification #
ZC10-19116794
Certified
2019-11-14T10:22:21.828569
Z-Wave Version
6.71.01

Security

As a Z-Wave Plus certified product, Z-Wave Outdoor Smart Plug supports Z-Wave S2 security. The following security modes are directly supported:

  • S2 Unauthenticated

Features

Minoston describes Z-Wave Outdoor Smart Plug as having the following features:

  • Electric Load Type
  • Firmware updatable via a compatible Z-Wave gateway
  • Outdoor Use
  • Switch Load Capacity Watts
  • Color
  • FLiRS capable
  • Supports Network Wide Inclusion
  • Supports Z-Wave Explorer Frames
  • Supports Z-Wave SmartStart allowing you to setup the product simply by scanning its QR code via

Installation instructions

Factory reset Z-Wave Outdoor Smart Plug

Press click Z-Wave button 3 times quickly, and hold for at least 10 seconds at the third time to restore the device to the factory
Node:Please use this procedure only when the network primary controller is missing or otherwise inoperable.

ADD the MP22Z from the existing Z-Wave home control network with your primary controller.
---Refer to your primary controller instructions to process the inclusion / exclusion setup procedure.
---When prompted by your primary controller, click the Up or Down button three times in one second.
Include MP22Zto/from a Z-Wave Gateway with supporting Security.The MP22Zcan support the Primary Controller that implemented the security S2.

Remove the MP22Zfrom the existing Z-Wave home control network with your primary controller.
---Refer to your primary controller instructions to process the inclusion / exclusion setup procedure.
---When prompted by your primary controller, click the Up or Down button three times in one second.
Include MP22Zto/from a Z-Wave Gateway with supporting Security.The MP22Z can support the Primary Controller that implemented the security S2.

Please note that this is a user manual Z-Wave Outdoor Smart Plug from Minoston is provided as is and without warranty; all information contained herein is provided by the manufacturer or the certifying body. The information provided is for reference only and is not intended to be used as a substitute for professional advice. ZWaveProducts.com only warrants and is only able to support products purchased directly from us. If you have Z-Wave Outdoor Smart Plug and have not purchased it from us, please contact the manufacturer directly with any further questions you may have.