The following is an overview of the user manual for the Z-Wave product Z-Wave Plug with Energy Monitor (MP31ZP)from Minoston. To view other Z-Wave products and manuals from Minoston follow that link.
Overview
Schedule your appliances, run a timer, or check the On/Off status to monitor and save energy.
The compact size gives full access to the second outlet in a standard receptacle.
Security
As a Z-Wave Plus certified product, Z-Wave Plug with Energy Monitor supports Z-Wave S2 security. The following security modes are directly supported:
- S2 Unauthenticated
Features
Minoston describes Z-Wave Plug with Energy Monitor as having the following features:
- Color
- Firmware updatable via a compatible Z-Wave gateway
- FLiRS capable
- Supports Network Wide Inclusion
- Supports Z-Wave Explorer Frames
- Supports Z-Wave SmartStart allowing you to setup the product simply by scanning its QR code via
Installation instructions
Factory reset Z-Wave Plug with Energy Monitor
Press the button twice quickly and then press and hold the button 10S.device will reset
(Node:Please use this procedure only when the network primary controller is missing or otherwise inoperable)
ADD or Remove the MP31ZP from the existing Z-Wave™ home control network with your primary controller.
---Refer to your primary controller instructions to process the inclusion / exclusion setup procedure.
---When prompted by your primary controller, click the PROG button Three times in one second
Include MP31ZP to/from a Z-Wave™ Gateway with supporting Security.The MP31ZP can support the Primary Controller that implemented the security S2.
ADD or Remove the MP31ZP from the existing Z-Wave™ home control network with your primary controller.
---Refer to your primary controller instructions to process the inclusion / exclusion setup procedure.
---When prompted by your primary controller, click the PROG button Three times in one second
Include MP31ZP to/from a Z-Wave™ Gateway with supporting Security.The MP31ZP can support the Primary Controller that implemented the security S2.
Please note that this is a user manual Z-Wave Plug with Energy Monitor from Minoston is provided as is and without warranty; all information contained herein is provided by the manufacturer or the certifying body. The information provided is for reference only and is not intended to be used as a substitute for professional advice. ZWaveProducts.com only warrants and is only able to support products purchased directly from us. If you have Z-Wave Plug with Energy Monitor and have not purchased it from us, please contact the manufacturer directly with any further questions you may have.