The following is an overview of the user manual for the Z-Wave product Gateway Controller (ITB-5105)from MITSUMI. To view other Z-Wave products and manuals from Mitsumi follow that link.
Overview
Security
As a Z-Wave Plus certified product, Gateway Controller supports Z-Wave S2 security. The following security modes are directly supported:
- S2 Access Control
- S2 Authenticated
- S2 Unauthenticated
Features
Mitsumi describes Gateway Controller as having the following features:
- Color
- Controller Supports Multiple Networks
- Gateway Has Preferred Partners
- IP (Ingress Protection) Rated
- FLiRS capable
- Supports Network Wide Inclusion
- Supports Z-Wave Explorer Frames
- Supports Z-Wave SmartStart allowing you to setup the product simply by scanning its QR code via
Installation instructions
SmartStart location
SmartStart QR code's location as follows: When tapping the Setting button, a Settings dialog will be displayed.
Select an item to be set. When tapping an item, a dialog will be displayed.
・GW DSK
Show Gateway DSK(QR CODE)
SmartStart installation
This product supports SmartStart integration and can be included in the network by scanning the QR code or entering the PIN.
Display the registered provisioning list (DSK and inclusion status).
Press “Add” to display the camera screen.
As the camera st
Factory reset Gateway Controller
Press “RESET” in the Factory Default Reset dialog. This will reset the Z-Wave™ chip, and the gateway will show “DEVICE RESET LOCALLY NOTIFICATION” after the restart.
If this controller is the primary controller for your network, resetting it will result
Please note that this is a user manual Gateway Controller from MITSUMI is provided as is and without warranty; all information contained herein is provided by the manufacturer or the certifying body. The information provided is for reference only and is not intended to be used as a substitute for professional advice. ZWaveProducts.com only warrants and is only able to support products purchased directly from us. If you have Gateway Controller and have not purchased it from us, please contact the manufacturer directly with any further questions you may have.