The following is an overview of the user manual for the Z-Wave product Smart Brain (MIT-SB100)from Modacom Co., Ltd. To view other Z-Wave products and manuals from Modacom, Ltd follow that link.
Overview
The Smart Brain™ supports interconnection to a lot of devices with WiFi, Bluetooth, Z-wave, or infrared communication interface. Equipped with oneM2M platform, OMNIPASS, the Smart Brain also supports interworking with several IoT platforms such as AllJoyn and so on.
It communicates with people through voice input on the Smart Brain™ App to provide useful life information like weather, currency, news and for controlling electronic appliances such as TV and air conditioner.
The Smart Brain™ can construct security system used together with companion devices such as door sensor and supports home automation by presetting internal-external environments. Also, it can connect to Smart-Plug for efficient power management. It provides wireless Internet access point functionality too.
The greatest advantage of the Smart Brain™ is that it can work together with various types of device from different venders to develop new smart M2M/IoT services.
Security
As a Z-Wave Plus certified product, Smart Brain supports Z-Wave S2 security. The following security modes are directly supported:
Features
Modacom, Ltd describes Smart Brain as having the following features:
- FLiRS capable
- Supports Network Wide Inclusion
- Supports Z-Wave Explorer Frames
- Supports Z-Wave SmartStart allowing you to setup the product simply by scanning its QR code via
Installation instructions
Remove a device or controller from the Z-Wave network.
To remove a device from Smart Brain™, press button “Add Devices” and press ‘Z+’ icon.
When the list of Z-Wave commands is shown, press “Remove” menu in commands.
Removing a device is confirmed with a triple press of a node button typically. Notification will be received.
Add a new device or controller to the Z-Wave network.
To connect a device to Smart Brain™, press button “Add Devices” and press ‘Z+’ icon.
When the list of Z-Wave commands is shown, press “Add” menu in commands.
The addition of a device is confirmed with a triple press of a node button typically. Notification will be received. When the device is detected, the device in list of device is shown if the device is connected to Smart Brain™ normally.
To include Smart Brain™ in an existing Z-Wave network, press “Learn” menu in commands. Please wait at least 10 seconds. Make sure the Smart Brain™ is included in a Z-Wave controller.
Factory reset Smart Brain
To reset a device Smart Brain™, press button “Add Devices” and press ‘Z+’ icon.
When the list of Z-Wave commands is shown, press “Reset” menu in commands.
Please note that this is a user manual Smart Brain from Modacom Co., Ltd is provided as is and without warranty; all information contained herein is provided by the manufacturer or the certifying body. The information provided is for reference only and is not intended to be used as a substitute for professional advice. ZWaveProducts.com only warrants and is only able to support products purchased directly from us. If you have Smart Brain and have not purchased it from us, please contact the manufacturer directly with any further questions you may have.