The following is an overview of the user manual for the Z-Wave product Myhomebox (1.1.264015)from MYHOMEBOX. To view other Z-Wave products and manuals from MYHOMEBOX follow that link.
Overview
By connecting new wireless communication protocols such as Z-Wave and older ones like 433 MHz and 868 MHz, you are free to pick any device and brand of your choice. All devices controlled by one app makes a smart home accessible and affordable for anyone.
Works with: Z-Wave, Bluetooth, DECT ULE, Wifi, 433 MHz, 868 MHz.
- Compatible with hundreds of products
- Secure cloud
- Local app
- Easy to set up
- Expandable for future communication developments by USB port
Security
As a Z-Wave Plus certified product, Myhomebox supports Z-Wave S2 security. The following security modes are directly supported:
Features
MYHOMEBOX describes Myhomebox as having the following features:
- Firmware updatable via a compatible Z-Wave gateway
- Color
- Gateway Has Preferred Partners
- Communications Connections
- Communications Protocol
- Sensors
- Supported Notification Types
- FLiRS capable
- Supports Network Wide Inclusion
- Supports Z-Wave Explorer Frames
- Supports Z-Wave SmartStart allowing you to setup the product simply by scanning its QR code via
Installation instructions
Open the MYHOMEBOX app and go to Add Devices. In this page you see the Z-Wave controller. Open this page and select Learn (this is only possible when there are no other devices already connected to the MYHOMEBOX. If there are already other devices connected reset the controller first.
To remove the MYHOMEBOX from another network you can select the Learn button in the Add Devices Page:
Open the MYHOMEBOX app and go to Add Devices. In this page you see the Z-Wave controller. Open this page and select Learn. At the same time select Exclusion on your other network. MYHOMEBOX wil be excluded from that network.
Open the MYHOMEBOX app and go to Add Devices. In this page you see the Z-Wave controller. Open this page and select Learn (this is only possible when there are no other devices already connected to the MYHOMEBOX. If there are already other devices connected reset the controller first.
Factory reset Myhomebox
If this controller is the primary controller for your network, resetting it will result in the nodes in your network being orphaned and it will be necessary after the reset to exclude and re-include all of the nodes in the network. If this controller is being used as a secondary controller in the network, use this procedure to reset this controller only in the event that the network primary controller is missing or otherwise inoperable.
Please note that this is a user manual Myhomebox from MYHOMEBOX is provided as is and without warranty; all information contained herein is provided by the manufacturer or the certifying body. The information provided is for reference only and is not intended to be used as a substitute for professional advice. ZWaveProducts.com only warrants and is only able to support products purchased directly from us. If you have Myhomebox and have not purchased it from us, please contact the manufacturer directly with any further questions you may have.