The following is an overview of the user manual for the Z-Wave product Radio RGBW (MTRGB-100-WL)from myTEM SmartHome. To view other Z-Wave products and manuals from myTEM SmartHome follow that link.
Overview
In addition to the red-green-blue-white color control, a warm white setting can be realized if the LED strip supports this function.
Security
As a Z-Wave Plus certified product, Radio RGBW supports Z-Wave S2 security. The following security modes are directly supported:
- S2 Authenticated
- S2 Unauthenticated
Features
myTEM SmartHome describes Radio RGBW as having the following features:
- Color
- Firmware updatable via a compatible Z-Wave gateway
- Loads Controlled
- Switch Load Capacity Current
- Electric Load Type
- Supported Notification Types
- Switch Load Capacity Watts
- FLiRS capable
- Supports Network Wide Inclusion
- Supports Z-Wave Explorer Frames
- Supports Z-Wave SmartStart allowing you to setup the product simply by scanning its QR code via
Installation instructions
Exclusion (Remove)
To exclude (Remove) the device from a Z-Wave network, press the button four times in quick succession. When the device is in Add mode, the LED flashes green. When finished, the new status is:
Add: The LED lights up briefly in green
Remove: The LED lights up briefly in red
Inclusion (Add)
To include (Add) the device to a Z-Wave network, press the button four times in quick succession. When the device is in Add mode, the LED flashes green. When finished, the new status is:
Add: The LED lights up briefly in green
Remove: The LED lights up briefly in red
Factory reset Radio RGBW
Please use this procedure only when the network primary controller is missing or otherwise inoperable.
Please note that this is a user manual Radio RGBW from myTEM SmartHome is provided as is and without warranty; all information contained herein is provided by the manufacturer or the certifying body. The information provided is for reference only and is not intended to be used as a substitute for professional advice. ZWaveProducts.com only warrants and is only able to support products purchased directly from us. If you have Radio RGBW and have not purchased it from us, please contact the manufacturer directly with any further questions you may have.