The following is an overview of the user manual for the Z-Wave product Smart Home GPON ONT (G-240WZ-A)from NOKIA. To view other Z-Wave products and manuals from NOKIA follow that link.
Overview
Security
As a Z-Wave Plus certified product, Smart Home GPON ONT supports Z-Wave S2 security. The following security modes are directly supported:
Features
NOKIA describes Smart Home GPON ONT as having the following features:
- Communications Connections
- Communications Protocol
- Controller Supports Multiple Networks
- Controller Supports Multiple Z-Wave Interfaces
- Firmware updatable via a compatible Z-Wave gateway
- Gateway Has Preferred Partners
- Sensors
- Supported Notification Types
- Color
- FLiRS capable
- Supports Network Wide Inclusion
- Supports Z-Wave Explorer Frames
- Supports Z-Wave SmartStart allowing you to setup the product simply by scanning its QR code via
Installation instructions
To Exclude a Z-Wave device from the Z-Wave network using the Nokia G-240WZ-A ONT
1. Click Remove option under device operation section in Nokia SmartHome Mobile App. This will start the Z-Wave exclusion process.
2. Follow the device specific exclusion instructions as mentioned in device User Manual to remove the same from Nokia G-240WZ-A network.
3. Once the exclusion is successfull, Nokia G-240WZ-A will automatically remove the device from Nokia Mobile APP.
To include a Z-Wave device into the Z-Wave network using the Nokia G-240WZ-A ONT:
1. Click Pair option under device operation section in Nokia SmartHome Mobile App. This will start the Z-Wave Inclusion process and begin searching for any new device.
2. Follow the device specific inclusion instructions as mentioned in device User Manual to Pair the same into Nokia G-240WZ-A network.
3. Once the pairing is successfull Nokia G-240WZ-A will automatically identify the included device into it's Z-Wave network & displayed under All device section/Unkonwn group in Mobile APP.
To include Nokia G-240WZ-A ONT into existing Z-Wave network, please use the WebGUI and follow the below steps. 1. Before starting learn mode in Nokia G-240WZ-A ONT, start inclusion mode in the another controller
2. Open webGUI
3. Select Home Device Management Page
4. Select Detailed Device page option under Z-wave controller
5. In the Device Detail page of Z-Wave controller, under Mode menu, select learn Mode
Learn Mode is eanbled on Nokia G-240WZ-A ONT, it will start learning the existing Z-Wave network details from the other controller.
Factory reset Smart Home GPON ONT
Follow below process to reset Nokia G-240WZ-A to factory default:
1. Login to Nokia G-240WZ-A WebGUI using credentials & IP address mentioned on the back of the device.
2. After successful login, go to SmartHome>Maintenance page
3. Click "" Factory Default"" button, confirming this operation Nokia G-240WZ-A will be reset to factory default condition.
RESETTING CONTROLLER:
""If this controller is the primary controller for your network, resetting it will result in the nodes in your network being orphaned and it will be necessary after the reset to exclude and re-include all of the nodes in the network.
If this controller is being used as a secondary controller in the network, use this procedure to reset this controller only in the event that the network primary controller is missing or otherwise inoperable.""
Nokia G-240WZ-A ONT supports backup and restore option of configuration details.
Nokia G-240WZ-A ONT does not only support Z-Wave devices, but also supports other technologies making it possible to combine Z-Wave devices and other wireless smart devices in a single ONT box. Using Nokia SmartHome App end user can create a perfect automation scenarios where Z-Wave devices can interact with other wireless devices.
Please note that this is a user manual Smart Home GPON ONT from NOKIA is provided as is and without warranty; all information contained herein is provided by the manufacturer or the certifying body. The information provided is for reference only and is not intended to be used as a substitute for professional advice. ZWaveProducts.com only warrants and is only able to support products purchased directly from us. If you have Smart Home GPON ONT and have not purchased it from us, please contact the manufacturer directly with any further questions you may have.