The following is an overview of the user manual for the Z-Wave product MiFi Secure (SA 1100)from Novatel Wireless. To view other Z-Wave products and manuals from Novatel Wireless follow that link.
Designed for simplicity, the MiFi Secure SA 1100 communication module fits easily inside Simon XT/XTi security panels for an instant 3G upgrade and enables the connected home leveraging the Icontrol One Interactive Security and Home Automation platform.
As a Z-Wave Plus certified product, MiFi Secure supports Z-Wave S2 security. The following security modes are directly supported:
Novatel Wireless describes MiFi Secure as having the following features:
- FLiRS capable
- Supports Network Wide Inclusion
- Supports Z-Wave Explorer Frames
- Supports Z-Wave SmartStart allowing you to setup the product simply by scanning its QR code via
To include another Z-Wave product, log into the Icontrol user interface and select ""Manage Devices"". Then select ""Z-Wave"". From the Z-Wave screen, select ""Add Z-Wave"". Perform the necessary steps on the targeted Z-Wave device to add it to the system.
To exclude another Z-Wave product, log into the Icontrol user interface and select ""Manage Devices"". Then select ""Z-Wave"". From the Z-Wave screen, select ""Reset"". Perform the necessary steps on the targeted Z-Wave device to exclude it from the system.
Factory reset MiFi Secure
To reset the MiFi Secure to factory defaults, push and hold the ""Reset"" button for at least 15 seconds (or until all LED's begin flashing simultaneously). Note: resetting your MiFi Secure will remove it and all associated devices from your Icontrol system, in addition to clearing all communication settings.
Please note that this is a user manual MiFi Secure from Novatel Wireless is provided as is and without warranty; all information contained herein is provided by the manufacturer or the certifying body. The information provided is for reference only and is not intended to be used as a substitute for professional advice. ZWaveProducts.com only warrants and is only able to support products purchased directly from us. If you have MiFi Secure and have not purchased it from us, please contact the manufacturer directly with any further questions you may have.