Ngd00z (NGD00Z) manual for Z-Wave

The following is an overview of the user manual for the Z-Wave product Ngd00z (NGD00Z)from NuTone. To view other Z-Wave products and manuals from NuTone follow that link.

  1. Overview
  2. Security
  3. Features
  4. Installation instructions


SKU Code
Smart Garage Door Controller, Z-Wave Enabled

NGD00Z – Smart Garage Door Controller – Automation for your Garage
• Wirelessly control and monitor your garage door from anywhere with the safest, most secure Z-Wave NuTone Smart Garage Door Controller -- Patent Pending
• Assured safe operation with audible and visual notification prior to Open/Close of the garage door
• Only Smart Garage Door Controller with secure barrier command class encryption eliminating unauthorized access to your home
• Works with virtually all sectional automatic garage door openers manufactured after 1993
• Installs in less than 30 minutes
• Works with other Z-Wave devices in your home to ensure full coverage, reducing and eliminating dead spots in even the largest homes.
• Requires Z-Wave compatible gateway (sold separately)
• Signal (frequency): 908.42MZ
• Up to 100 feet between wireless gateway and/or the closest Z-Wave device
• Network wide inclusion for easy setup
Version #
02 was the version certified
Certification #
Z-Wave Version


As a Z-Wave Plus certified product, Ngd00z supports Z-Wave S2 security. The following security modes are directly supported:


    NuTone describes Ngd00z as having the following features:

    • FLiRS capable
    • Supports Network Wide Inclusion
    • Supports Z-Wave Explorer Frames
    • Supports Z-Wave SmartStart allowing you to setup the product simply by scanning its QR code via

    Installation instructions

    Momentarily press the ""Link"" button on the side of the NGD00Z to enter Inclusion. The device will stay in Inclusion for 10 to 14 seconds.

    Momentarily press the ""Link"" button on the side of the NGD00Z to enter Exclusion. The device will stay in Exclusion for 10 to 14 seconds.


    Factory reset Ngd00z

    Press the ""Link"" button on the side of the NGD00Z five times within 30 seconds. Please use this procedure only in the event that the network primary controller is missing or otherwise inoperable.


    Please note that this is a user manual Ngd00z from NuTone is provided as is and without warranty; all information contained herein is provided by the manufacturer or the certifying body. The information provided is for reference only and is not intended to be used as a substitute for professional advice. only warrants and is only able to support products purchased directly from us. If you have Ngd00z and have not purchased it from us, please contact the manufacturer directly with any further questions you may have.