Smart Box (O2 Smart Box 1) manual for Z-Wave

The following is an overview of the user manual for the Z-Wave product Smart Box (O2 Smart Box 1)from O2 Czech Republic a.s.. To view other Z-Wave products and manuals from O2 follow that link.

  1. Overview
  2. Security
  3. Features
  4. Installation instructions


O2 Smart Box
SKU Code
O2 Smart Box 1
Z-Wave enabled Smart Home gateway and router by O2 Czech Republic a.s.
Version #
HW: 1 FW: 6.04:02.81:01.00:01.00 was the version certified
Certification #
Z-Wave Version


As a Z-Wave Plus certified product, Smart Box supports Z-Wave S2 security. The following security modes are directly supported:

  • S2 Access Control
  • S2 Authenticated
  • S2 Unauthenticated


O2 describes Smart Box as having the following features:

  • FLiRS capable
  • Supports Network Wide Inclusion
  • Supports Z-Wave Explorer Frames
  • Supports Z-Wave SmartStart allowing you to setup the product simply by scanning its QR code via

Installation instructions

O2 Smart Box is mainly controlled from within O2 Smart Box application for smartphones.
In section Add new device in our application, customer selects type of device and application activates inclusion mode at the gateway.

O2 Smart Box is mainly controlled from within O2 Smart Box application for smartphones.
In detail of every Z-Wave device, customer can find option to "Unpair device". When he selects this option, gateway enters exclusion mode and instruction how to exclude this device is shown in application (e.g. Click the pairing button three times within one second)

Factory reset Smart Box

Select the Factory Reset item in the Advanced drop-down menu in WebUI.
Select the Factory Reset item in settings section in O2 Smart Box application.
Press and hold reset button at the back side of O2 Smart Box for 15 seconds.

SmartStart location

SmartStart QR code's location as follows: This part is covered in waiver. Discussed via email between Aaron Simon( and Radek Vojkůvka (

Please note that this is a user manual Smart Box from O2 Czech Republic a.s. is provided as is and without warranty; all information contained herein is provided by the manufacturer or the certifying body. The information provided is for reference only and is not intended to be used as a substitute for professional advice. only warrants and is only able to support products purchased directly from us. If you have Smart Box and have not purchased it from us, please contact the manufacturer directly with any further questions you may have.