Door Lock (PDS-100) manual for Z-Wave

The following is an overview of the user manual for the Z-Wave product Door Lock (PDS-100)from Philia. To view other Z-Wave products and manuals from Philia follow that link.

  1. Overview
  2. Security
  3. Features
  4. Installation instructions

Overview

Name
Philia Door Lock
SKU Code
PDS-100
Description
The PDS-100 is a door lock that can be conveniently used with Z-Wave and Bluetooth.
You can control the door lock directly from a phone via the Bluetooth function in close range, check the status of the door lock on the outside by connection to the Z-Wave hub as well as control door locks and check status via Google Home or Amazon Alexa.
Version #
HW: 1 FW: 1.00:01.00 was the version certified
Certification #
ZC10-18076195
Certified
2018-07-16T23:42:00.437708
Z-Wave Version
6.71.03

Security

As a Z-Wave Plus certified product, Door Lock supports Z-Wave S2 security. The following security modes are directly supported:

  • S2 Access Control

Features

Philia describes Door Lock as having the following features:

  • Supported Notification Types
  • Battery Quantity
  • Battery powered using AA batteries
  • Communications Connections
  • Color
  • Door Lock Type
  • FLiRS capable
  • Supports Network Wide Inclusion
  • Supports Z-Wave Explorer Frames
  • Supports Z-Wave SmartStart allowing you to setup the product simply by scanning its QR code via

Installation instructions

Factory reset Door Lock

Please proceed with the door lock open.
1. Open the battery cover of the indoor body and press the [R] button for 9 seconds.
2. Press the [1][2][3][6][5][4][7] button after pressing the [R] button.

Please use this procedure only when the network primary controller is missing or otherwise inoperable.

Please proceed with the door lock open.
1. Set the controller in inclusion mode.
2. Open the battery cover of the indoor body and press the [R] button for 7 seconds.
3. Press the [1][4][7] button after pressing the [R] button.

Please proceed with the door lock open.
1. Set the controller in exclusion mode.
2. Open the battery cover of the indoor body and press the [R] button for 7 seconds.
3. Press the [3][6][7] button after pressing the [R] button.

Please note that this is a user manual Door Lock from Philia is provided as is and without warranty; all information contained herein is provided by the manufacturer or the certifying body. The information provided is for reference only and is not intended to be used as a substitute for professional advice. ZWaveProducts.com only warrants and is only able to support products purchased directly from us. If you have Door Lock and have not purchased it from us, please contact the manufacturer directly with any further questions you may have.