The following is an overview of the user manual for the Z-Wave product In Wall Switch (PAN35-RU)from Philio. To view other Z-Wave products and manuals from Philio follow that link.
Overview
Security
As a Z-Wave Plus certified product, In Wall Switch supports Z-Wave S2 security. The following security modes are directly supported:
- S2 Authenticated
- S2 Unauthenticated
Features
Philio describes In Wall Switch as having the following features:
- Color
- Firmware updatable via a compatible Z-Wave gateway
- FLiRS capable
- Supports Network Wide Inclusion
- Supports Z-Wave Explorer Frames
- Supports Z-Wave SmartStart allowing you to setup the product simply by scanning its QR code via
Installation instructions
SmartStart location
SmartStart QR code's location as follows: 1. To initiate the SmartSart process, please type in the first five digits of DSK string or scan the QR code. The QR Code can be found on PAN35 or in the box. Ex: DSK: 18112-24021-58001-62259-57092-27453-08187-474082.
2. PAN35 is supported with SmartSta
1.Have Z-Wave Controller entered inclusion mode.
2.Pressing Include button of PAN35 three times within 2 seconds will enter inclusion mode.
1.Have Z-Wave Controller entered exclusion mode.
2.Pressing Include button of PAN35 three times within 2 seconds will enter exclusion mode.
3.Node ID has been excluded.
Factory reset In Wall Switch
Please use this procedure only when the network primary controller is missing or otherwise inoperable.
1.Pressing Include button of PAN35 three times within 2 seconds will enter inclusion mode.
2.Within 1 second, press Include button of PAN35 again for
Please note that this is a user manual In Wall Switch from Philio is provided as is and without warranty; all information contained herein is provided by the manufacturer or the certifying body. The information provided is for reference only and is not intended to be used as a substitute for professional advice. ZWaveProducts.com only warrants and is only able to support products purchased directly from us. If you have In Wall Switch and have not purchased it from us, please contact the manufacturer directly with any further questions you may have.