The following is an overview of the user manual for the Z-Wave product Smart Energy In Wall Meter (PAB01-1)from Philio. To view other Z-Wave products and manuals from Philio follow that link.
Overview
Mini size design let the module can easily hide itself into the electricity distribution box and that will be good for the house decoration. This dual meter module is able to detect Instant power wattage (13800W/230Vac)(60 Amperes) of connected light or appliances.
Security
As a Z-Wave Plus certified product, Smart Energy In Wall Meter supports Z-Wave S2 security. The following security modes are directly supported:
Features
Philio describes Smart Energy In Wall Meter as having the following features:
- FLiRS capable
- Supports Network Wide Inclusion
- Supports Z-Wave Explorer Frames
- Supports Z-Wave SmartStart allowing you to setup the product simply by scanning its QR code via
Installation instructions
1. Put your Z-Wave controller into inclusion mode by following the instructions provided by the controller manufacturer.
2. Pressing Include button three times within 2 seconds will enter inclusion mode.
1. Put your Z-Wave controller into exclusion mode by following the instructions provided by the controller manufacturer.
2. Pressing Include button three times within 2 seconds will enter exclusion mode.
3. Node ID has been excluded.
Factory reset Smart Energy In Wall Meter
Use this procedure only in the event that the primary controller is lost or otherwise inoperable.
1. Pressing INCLUDE_BUTTON three times within 2 seconds will enter inclusion mode.
2. Within 1 second, press Include button again for 5 seconds.
3. IDs are excluded.
Please note that this is a user manual Smart Energy In Wall Meter from Philio is provided as is and without warranty; all information contained herein is provided by the manufacturer or the certifying body. The information provided is for reference only and is not intended to be used as a substitute for professional advice. ZWaveProducts.com only warrants and is only able to support products purchased directly from us. If you have Smart Energy In Wall Meter and have not purchased it from us, please contact the manufacturer directly with any further questions you may have.