Danalock V2 BTZJ (Danalock V2 BTZJ) manual for Z-Wave

The following is an overview of the user manual for the Z-Wave product Danalock V2 BTZJ (Danalock V2 BTZJ)from Poly-Control APS. To view other Z-Wave products and manuals from Poly-Control APS follow that link.

  1. Overview
  2. Security
  3. Features
  4. Installation instructions


Danalock V2 BTZJ
SKU Code
Danalock V2 BTZJ
Z-Wave Controlled door lock with keypad, and Bluetooth Smart.
Operated by Z-Wave.
Connect Danalock to your Z-Wave gateway - Danalock interfaces with your existing Z-Wave network through the Danalock smartphone app.
Operate Danalock remotely by accessing your Z-Wave network from anywhere in the world with internet access.

Version #
HW: 136 FW: was the version certified
Certification #
Z-Wave Version


As a Z-Wave Plus certified product, Danalock V2 BTZJ supports Z-Wave S2 security. The following security modes are directly supported:


    Poly-Control APS describes Danalock V2 BTZJ as having the following features:

    • Battery Quantity
    • Battery powered using CR123 batteries
    • Firmware updatable via a compatible Z-Wave gateway
    • FLiRS capable
    • Supports Network Wide Inclusion
    • Supports Z-Wave Explorer Frames
    • Supports Z-Wave SmartStart allowing you to setup the product simply by scanning its QR code via

    Installation instructions

    To add or include the danalock into a Z-Wave network
    Set the controller in inclusion mode
    Touch the User Button until you hear two beeps.

    To remove or exclude the danalock into a Z-Wave network
    Set the controller in exclusion mode
    Touch the User Button until you hear two beeps.

    Factory reset Danalock V2 BTZJ

    The danalock can be set to factory settings by holding the User Button for ten beeps. Please use this procedure only when the primary controller is missing or otherwise inoperable.

    Please note that this is a user manual Danalock V2 BTZJ from Poly-Control APS is provided as is and without warranty; all information contained herein is provided by the manufacturer or the certifying body. The information provided is for reference only and is not intended to be used as a substitute for professional advice. ZWaveProducts.com only warrants and is only able to support products purchased directly from us. If you have Danalock V2 BTZJ and have not purchased it from us, please contact the manufacturer directly with any further questions you may have.