The following is an overview of the user manual for the Z-Wave product IQ Panel 2+ (QS9201-1208-840)from Qolsys Inc.. To view other Z-Wave products and manuals from Qolsys follow that link.
Overview
Security
As a Z-Wave Plus certified product, IQ Panel 2+ supports Z-Wave S2 security. The following security modes are directly supported:
- S2 Access Control
- S2 Authenticated
- S2 Unauthenticated
Features
Qolsys describes IQ Panel 2+ as having the following features:
- Firmware updatable via a compatible Z-Wave gateway
- Gateway Has Preferred Partners
- Color
- Sensors
- Supported Notification Types
- Battery Quantity
- Battery powered using Lithium Ion batteries
- Communications Connections
- FLiRS capable
- Supports Network Wide Inclusion
- Supports Z-Wave Explorer Frames
- Supports Z-Wave SmartStart allowing you to setup the product simply by scanning its QR code via
Installation instructions
Swipe down to access “Settings” < Touch “Advanced Settings” < Enter code < Touch “Installation” < Touch “Devices” < Touch “Z-Wave Devices” < Touch “Add Device” < Touch “Pair” < Press pair or learn button on device < Adjust device name as needed < Select “Automation” < Click “Add” to save
Swipe down to access “Settings” < Touch “Advanced Settings” < Enter code < Touch “Installation” < Touch “Devices” < Touch “Z-Wave Devices” < Touch “Delete failed device from panel” < Check boxes next to devices you want to delete < Touch “Delete”
7” HD Touchscreen
5MP Panel Camera sends disarm photos to your phone
Bluetooth Touchless Disarming
S-Line encrypted sensor technology with support for up to 128 security and life safety devices
LTE and Wi-Fi Dual Path Connectivity
Built-in Glassbreak
Built-in Router creates secure private network for IP devices
Z-Wave Plus Radio with support for up to 128 Z-Wave devices
Software updates over the air
SmartStart location
SmartStart QR code's location as follows: 1. On home menu, swipe down from the top of the screen. A pulldown menu should appear.
2. Press the SETTINGS icon.
3. Press the ADVANCED SETTINGS icon.
4. Enter in installer code.
5. Press the INSTALLATION icon.
6. Press the DEVICES icon.
7. Press the Z-WAVE DEVICES icon.
8. Press the ADD/REMOVE CONTROLLER icon. The IQ Panel 2+ DSK will now be displayed. If the icon isn’t present, the secondary controller functionalities needs to be enabled. Please refer to the “Enabling secondary controller functionalities” section.
SmartStart installation
1. On home menu, swipe down from the top of the screen. A pulldown menu should appear.
2. Press the SETTINGS icon.
3. Press the ADVANCED SETTINGS icon.
4. Enter in installer code.
5. Press the INSTALLATION icon.
6. Press the DEVICES icon.
7. Press the Z-WAVE DEVICES icon.
8. Press the SMART START icon.
9. A QR code scanner will appear from the IQ Panel 2+’s camera. Scan in the QR code included on the Smart Start enabled device’s documentation, physical device and/or packaging.
10. Press the Add button. This adds the Smart Start enabled device into the Provision List.
11. Power on the Smart Start enabled device. The device will attempt to securely include the device in the background, and the IQ Panel 2+ UI will be updated to reflect changes once inclusion completes.
1. On home menu, swipe down from the top of the screen. A pulldown menu should appear.
2. Press the SETTINGS icon.
3. Press the ADVANCED SETTINGS icon.
4. Enter in installer code.
5. Press the INSTALLATION icon.
6. Press the DEVICES icon.
7. Press the Z-WAVE DEVICES icon.
8. Press the ADD DEVICE icon.
9. Press the Include button to enter in the Inclusion-Mode.
10. Press the Z-Wave button on the product being added in the network.
11. IQ Panel 2+ will detect the product, and you will be shown a configuration screen for the product.
12. Press the Add Icon.
13. Repeat steps 10 through 13 for all the products being added in.
1. On home menu, swipe down from the top of the screen. A pulldown menu should appear.
2. Press the SETTINGS icon.
3. Press the ADVANCED SETTINGS icon.
4. Enter in installer code.
5. Press the INSTALLATION icon.
6. Press the DEVICES icon.
7. Press the Z-WAVE DEVICES icon.
8. Press the CLEAR DEVICE Icon to begin Exclusion-Mode.
9. Press the Z-Wave button on the product being excluded.
10. Popup dialog should appear indicating a successful exclusion.
11. Repeats steps 9 thru 11 for each device being excluded.
1. On home menu, swipe down from the top of the screen. A pulldown menu should appear.
2. Press the SETTINGS icon.
3. Press the ADVANCED SETTINGS icon.
4. Enter in installer code.
5. Press the INSTALLATION icon.
6. Press the DEVICES icon.
7. Press the Z-WAVE DEVICES icon.
8. Press the ADD/REMOVE CONTROLLER icon. The IQ Panel 2+ DSK will now be displayed. If the icon isn’t present, the secondary controller functionalities needs to be enabled. Please refer to the “Enabling secondary controller functionalities” section.
- When IQ Panel 2+ includes a controller, network details are automatically shared with the included controller.
- Network relevant information are transferred from the main controller to the secondary controller. In order to initiate this process, start the Add Mode on the main controller and start the Learn Mode on the secondary controller to receive the updated information
1. On home menu, swipe down from the top of the screen. A pulldown menu should appear.
2. Press the SETTINGS icon.
3. Press the ADVANCED SETTINGS icon.
4. Enter in installer code.
5. Press the INSTALLATION icon.
6. Press the DEVICES icon.
7. Press the Z-WAVE DEVICES icon.
8. Press the PROVISIONING LIST icon
9. Press either the Edit icon to edit or the Trash Bin icon to delete devices from the Provisioning List
Factory reset IQ Panel 2+
1. On home menu, swipe down from the top of the screen. A pulldown menu should appear.
2. Press the SETTINGS icon.
3. Press the ADVANCED SETTINGS icon.
4. Enter in installer code.
5. Press the INSTALLATION icon.
6. Press the DEVICES icon.
7. Press the Z-WAVE DEVICES icon.
8. Press the REMOVE ALL DEVICES icon.
9. Press YES on the confirmation dialog to perform a reset.
Please note that this is a user manual IQ Panel 2+ from Qolsys Inc. is provided as is and without warranty; all information contained herein is provided by the manufacturer or the certifying body. The information provided is for reference only and is not intended to be used as a substitute for professional advice. ZWaveProducts.com only warrants and is only able to support products purchased directly from us. If you have IQ Panel 2+ and have not purchased it from us, please contact the manufacturer directly with any further questions you may have.