Door/window Sensor (HT01-609I) manual for Z-Wave

The following is an overview of the user manual for the Z-Wave product Door/window Sensor (HT01-609I)from RayHome. To view other Z-Wave products and manuals from RayHome follow that link.

  1. Overview
  2. Security
  3. Features
  4. Installation instructions


SKU Code
Door / Window Open. Close monitoring function
Case open , Battery level monitoring function
LED function
Version #
HW: 1 FW: 1.00 was the version certified
Certification #
Z-Wave Version


As a Z-Wave Plus certified product, Door/window Sensor supports Z-Wave S2 security. The following security modes are directly supported:


    RayHome describes Door/window Sensor as having the following features:

    • Battery Quantity
    • Battery powered using AAA 1.5V batteries
    • Color
    • Firmware updatable via a compatible Z-Wave gateway
    • FLiRS capable
    • Supports Network Wide Inclusion
    • Supports Z-Wave Explorer Frames
    • Supports Z-Wave SmartStart allowing you to setup the product simply by scanning its QR code via

    Installation instructions

    Z-Wave primary controller into inclusion mode. And press the inclusion/exclusion switch for sending NIF.

    Z-Wave primary controller into exclusion mode. And press 3 times the inclusion/exclusion switch for sending NIF.

    Factory reset Door/window Sensor

    Held 10 seconds the inclusion/exclusion switch for sending Device Reset Locally Notification.
    And reset to the Factory default.

    Support OTA Firmware update from controller. Use FIRMWARE_UPDATE_MD_V2_COMMAND_CLASS. To proceed the OTA process

    Case1. In the timeout-based scheme, the product is wakeup. Use 'wake up interval'.
    Case2. Physically scheme, include the product in a Z-Wave network, press the inclusion/exclusion switch for Wake Up Notification.

    Please note that this is a user manual Door/window Sensor from RayHome is provided as is and without warranty; all information contained herein is provided by the manufacturer or the certifying body. The information provided is for reference only and is not intended to be used as a substitute for professional advice. only warrants and is only able to support products purchased directly from us. If you have Door/window Sensor and have not purchased it from us, please contact the manufacturer directly with any further questions you may have.