Categories

Aeotec

Atrim

SmartThings

Z-Wave Products

USB Dongle (ZU1401EU-5) manual for Z-Wave

The following is an overview of the user manual for the Z-Wave product USB Dongle (ZU1401EU-5)from Raylios. To view other Z-Wave products and manuals from Raylios follow that link.

  1. Overview
  2. Security
  3. Features
  4. Installation instructions

Overview

Name
USB Dongle
SKU Code
ZU1401EU-5
Description
Use this USB dongle to connect the computer for controlling the Z-Wave devices. Or you could use the USB dongle to connect with the control box which could be compatible with Z-Wave solution and reserved the USB port then you could control the Z-Wave devices as the gateway does. This Z-Wave+ Certified Hardware, when combined with a Z-Wave+ Application, provides an overall Z-Wave+ end user experience.
Version #
HW: 0 FW: ERROR was the version certified
Certification #
ZC10-18015927
Certified
2017-12-20T00:36:41.314319
Z-Wave Version
6.51.02

Security

As a Z-Wave Plus certified product, USB Dongle supports Z-Wave S2 security. The following security modes are directly supported:

    Features

    Raylios describes USB Dongle as having the following features:

    • Color
    • FLiRS capable
    • Supports Network Wide Inclusion
    • Supports Z-Wave Explorer Frames
    • Supports Z-Wave SmartStart allowing you to setup the product simply by scanning its QR code via

    Installation instructions

    Please note that this is a user manual USB Dongle from Raylios is provided as is and without warranty; all information contained herein is provided by the manufacturer or the certifying body. The information provided is for reference only and is not intended to be used as a substitute for professional advice. ZWaveProducts.com only warrants and is only able to support products purchased directly from us. If you have USB Dongle and have not purchased it from us, please contact the manufacturer directly with any further questions you may have.