The following is an overview of the user manual for the Z-Wave product RE.GUARD Leakage detector (14573121001)from REHAU. To view other Z-Wave products and manuals from REHAU follow that link.
Overview
It has a highly sophisticated water meter and pressure meter built inside. Its algorithms are able to detect very small microleakages as well as larger leakages like e.g. pipe bursts. The sensibility can be adapted to your needs.
Furthermore statistics of your water consumption can be created to help you save water.
This product is available at your professional plumber.
Made and engineered in Europe
Security
As a Z-Wave Plus certified product, RE.GUARD Leakage detector supports Z-Wave S2 security. The following security modes are directly supported:
- S2 Authenticated
- S2 Unauthenticated
Features
REHAU describes RE.GUARD Leakage detector as having the following features:
- FLiRS capable
- Supports Network Wide Inclusion
- Supports Z-Wave Explorer Frames
- Supports Z-Wave SmartStart allowing you to setup the product simply by scanning its QR code via
Installation instructions
Press Z-wave button for 3 seconds
Press Z-wave button 3 times in 3 seconds
Factory reset RE.GUARD Leakage detector
Press left and right button for 20 seconds at the same time
To confirm press Z-wave button when Z-wave button is blinking red after 20 seconds
Please use this procedure only when the network primary controller is missing or otherwise inoperable
Always awake; not battery powered
SmartStart location
SmartStart QR code's location as follows: (1)DSK number can be found on the label on the left side just under the touch pad of the device
Please note that this is a user manual RE.GUARD Leakage detector from REHAU is provided as is and without warranty; all information contained herein is provided by the manufacturer or the certifying body. The information provided is for reference only and is not intended to be used as a substitute for professional advice. ZWaveProducts.com only warrants and is only able to support products purchased directly from us. If you have RE.GUARD Leakage detector and have not purchased it from us, please contact the manufacturer directly with any further questions you may have.