The following is an overview of the user manual for the Z-Wave product Ac Master (ZXT-600EU)from Remotec. To view other Z-Wave products and manuals from Remotec follow that link.
Overview
With its over 250 brands built-in code library and ever-green up to date cloud IR database supporting advanced code learning search, ZXT-600 can easily set up and smart control most of AC brands and models actively worldwide by Z-Wave gateway.
The battery powered device will allow you to mount it anywhere you want such as wall, ceiling or put it on table and never compromise on the form factor. By supporting OTA function, gateway can enable ZXT-600 to update firmware if newest available.
Security
As a Z-Wave Plus certified product, Ac Master supports Z-Wave S2 security. The following security modes are directly supported:
Features
Remotec describes Ac Master as having the following features:
- Sensors
- Thermostat Modes
- Color
- Battery powered using AA x 2pcs batteries
- Firmware updatable via a compatible Z-Wave gateway
- Thermostat HVAC Systems Supported
- FLiRS capable
- Supports Network Wide Inclusion
- Supports Z-Wave Explorer Frames
- Supports Z-Wave SmartStart allowing you to setup the product simply by scanning its QR code via
Installation instructions
1, Refer to your primary controller to enter into the Inclusion Mode or Exclusion Mode
2, When it is prompted to enter it, please triple click the “PROG” button within 1 second.
3, Green Indicator flashes TWICE then stay off
1, Refer to your primary controller to enter into the Inclusion Mode or Exclusion Mode
2, When it is prompted to enter it, please triple click the “PROG” button within 1 second.
3, Green Indicator flashes TWICE then stay off
Factory reset Ac Master
Press and Hold “PROG” button for 3 seconds on AC Master, the Green Indicator will light up. DO NOT Release the “PROG” Button until Green Indicator flashes TWICE.
Remark : Please use this procedure only when the network primary controller is missing or otherwise inoperable.
Press the ""PROG"" button to wakeup the unit
Please note that this is a user manual Ac Master from Remotec is provided as is and without warranty; all information contained herein is provided by the manufacturer or the certifying body. The information provided is for reference only and is not intended to be used as a substitute for professional advice. ZWaveProducts.com only warrants and is only able to support products purchased directly from us. If you have Ac Master and have not purchased it from us, please contact the manufacturer directly with any further questions you may have.