The following is an overview of the user manual for the Z-Wave product Proa7plus-eu (PROA7PLUS-EU)from Resideo. To view other Z-Wave products and manuals from Resideo follow that link.
Overview
Security
As a Z-Wave Plus certified product, Proa7plus-eu supports Z-Wave S2 security. The following security modes are directly supported:
- S2 Access Control
- S2 Authenticated
- S2 Unauthenticated
Features
Resideo describes Proa7plus-eu as having the following features:
- FLiRS capable
- Supports Network Wide Inclusion
- Supports Z-Wave Explorer Frames
- Supports Z-Wave SmartStart allowing you to setup the product simply by scanning its QR code via
Installation instructions
From the AIO main menu, select Devices, select Z-Wave Management, select Update Network
From the AIO main menu, select Devices, select Z-Wave Management, select Inclusion Mode
From the AIO main menu, select Devices, select Z-Wave Management, select Exclusion Mode
From the AIO main menu, select Devices, select Z-Wave Management, select Shift Controller
SmartStart location
SmartStart QR code's location as follows: DSK is displayed on the 7" touchscreen
Factory reset Proa7plus-eu
If the Control Panel is the primary controller for your network, resetting it results in the devices in your
network to be orphaned and is necessary after the reset to exclude and re-include all the devices in the network. This defaults the Z-Wave Controller in the system which removes all programmed Z-Wave devices, however, the devices do not receive a signal to be excluded. So, when they need to be included, they need to be excluded first.
Please note that this is a user manual Proa7plus-eu from Resideo is provided as is and without warranty; all information contained herein is provided by the manufacturer or the certifying body. The information provided is for reference only and is not intended to be used as a substitute for professional advice. ZWaveProducts.com only warrants and is only able to support products purchased directly from us. If you have Proa7plus-eu and have not purchased it from us, please contact the manufacturer directly with any further questions you may have.