IoT Hub (SHP-GS100M) manual for Z-Wave

The following is an overview of the user manual for the Z-Wave product IoT Hub (SHP-GS100M)from SAMSUNG SDS. To view other Z-Wave products and manuals from Samsung Sds follow that link.

  1. Overview
  2. Security
  3. Features
  4. Installation instructions


IoT Hub
SKU Code
IoT Hub makes your home secure at anytime and from anywhere.
A total security system which services intrusion detection, access management, and gas valve control, makes your life and home secured ever than before
Version #
01 was the version certified
Certification #
Z-Wave Version


As a Z-Wave Plus certified product, IoT Hub supports Z-Wave S2 security. The following security modes are directly supported:


    Samsung Sds describes IoT Hub as having the following features:

    • FLiRS capable
    • Supports Network Wide Inclusion
    • Supports Z-Wave Explorer Frames
    • Supports Z-Wave SmartStart allowing you to setup the product simply by scanning its QR code via

    Installation instructions

    1. Restart Main App.
    2. Press Exit Button.
    3. Press Menu Button.
    4. Press Settings Button.
    5. Press Inclusion / Exclusion Settings Button.
    6. Press Inclusion Button.
    7. Press Start Inclusion Button.
    8. SHP-GS100M enters into Inclusion Mode for 60 seconds and it trys to include a device.
    9. When a device is included to SHP-G100M, it displays that. If you want to include more, press include more.
    10. Enter Alias Name & Press Confirm.
    * Alias Name is 8 characters or less.

    1. Press Menu Button.
    2. Press Settings Button.
    3. Press Inclusion / Exclusion Settings Button.
    4. Press Exclusion Button.
    5. Press Confirm Exclusion or Cancel Button.
    6. Press Confirm Exclusion Button
    7. SHP-GS100M enters into Exclusion Mode for 60 seconds and it trys to exclude a device.
    8. When a device is excluded to SHP-G100M, it displays that. If you want to exclude more, press exclude more.
    9. Press Confirm Button.

    1. Select ‘Controller Learn Mode Request’.
    2. Insert value(5:Start, 6:Stop).
    3. Press Confirm button.

    Factory reset IoT Hub

    Use this procedure only when the network primary controller is missing or otherwise inoperable.
    1. Check the White or Blue LED of Top. White LED means that SHP-GS100M is Normal WiFi connection and has no slave device. Blue LED means that SHP-GS100M is Normal WiFi connection and has slave devices.
    2. Press Factory Default Reset Button during 10 seconds.

    Please note that this is a user manual IoT Hub from SAMSUNG SDS is provided as is and without warranty; all information contained herein is provided by the manufacturer or the certifying body. The information provided is for reference only and is not intended to be used as a substitute for professional advice. only warrants and is only able to support products purchased directly from us. If you have IoT Hub and have not purchased it from us, please contact the manufacturer directly with any further questions you may have.