The following is an overview of the user manual for the Z-Wave product Smart Button (SHP-TB100Z)from SAMSUNG SDS. To view other Z-Wave products and manuals from Samsung Sds follow that link.
Overview
Security
As a Z-Wave Plus certified product, Smart Button supports Z-Wave S2 security. The following security modes are directly supported:
Features
Samsung Sds describes Smart Button as having the following features:
- FLiRS capable
- Supports Network Wide Inclusion
- Supports Z-Wave Explorer Frames
- Supports Z-Wave SmartStart allowing you to setup the product simply by scanning its QR code via
Installation instructions
Factory reset Smart Button
Please use this procedure only in the event that the network primary controller is missing or otherwise inoperable
Press a Func_Button for 10 seconds in SHP-TB100Z
- If Factory Reset Process is successful, LED is Blinking 1 time in SHP-TB100Z
- Device Reset Locally notification is Transmitted
- press a Func_Button
- Click [Add] icon in Z-Wave PC Controller Program
- Press a Func_Button 1 time in SHP-TB100Z (Smart Button)
- If Inclusion Process is successful, LED is Blinking 3 times in SHP-TB100Z
- Click [Remove] icon in Z-Wave PC Controller Program
- Press a Func_Button 3 times quickly in SHP-TB100Z
- If Exclusion Process is successful, LED is Blinking 5 times in SHP-TB100Z
Please note that this is a user manual Smart Button from SAMSUNG SDS is provided as is and without warranty; all information contained herein is provided by the manufacturer or the certifying body. The information provided is for reference only and is not intended to be used as a substitute for professional advice. ZWaveProducts.com only warrants and is only able to support products purchased directly from us. If you have Smart Button and have not purchased it from us, please contact the manufacturer directly with any further questions you may have.