The following is an overview of the user manual for the Z-Wave product Window/Door Sensor (SHP-SB100Z)from SAMSUNG SDS. To view other Z-Wave products and manuals from Samsung Sds follow that link.
Overview
Harmonious design concept with home interior
Security
As a Z-Wave Plus certified product, Window/Door Sensor supports Z-Wave S2 security. The following security modes are directly supported:
Features
Samsung Sds describes Window/Door Sensor as having the following features:
- FLiRS capable
- Supports Network Wide Inclusion
- Supports Z-Wave Explorer Frames
- Supports Z-Wave SmartStart allowing you to setup the product simply by scanning its QR code via
Installation instructions
- wake up when push a Func Button
- wake up when door sensor is detected
- Click [Add] icon in Z-Wave PC Controller Program
- Press a Func_Button 1 time in SHP-SB100Z (Door Sensor)
- If Inclusion Process is successful, LED is Blinking 3 times in
SHP-SB100Z
- Click [Remove] icon in Z-Wave PC Controller Program
- Press a Func_Button 3 times quickly in SHP-SB100Z
- If Exclusion Process is successful, LED is Blinking 5 times in
SHP-SB100Z
Factory reset Window/Door Sensor
Device Factory Reset
- Use this procedure only when he network primary controller is missing
or otherwise inoperable
- Press a Func_Button for 10 seconds in SHP-SB100Z
- If Factory Reset Process is successful, LED is Blinking 1 time in SHP-SB100Z
- Device Reset Locally notification is Transmitted
Please note that this is a user manual Window/Door Sensor from SAMSUNG SDS is provided as is and without warranty; all information contained herein is provided by the manufacturer or the certifying body. The information provided is for reference only and is not intended to be used as a substitute for professional advice. ZWaveProducts.com only warrants and is only able to support products purchased directly from us. If you have Window/Door Sensor and have not purchased it from us, please contact the manufacturer directly with any further questions you may have.