Door Window Sensor (ZW1101) manual for Z-Wave

The following is an overview of the user manual for the Z-Wave product Door Window Sensor (ZW1101)from show home. To view other Z-Wave products and manuals from show home follow that link.

  1. Overview
  2. Security
  3. Features
  4. Installation instructions

Overview

Name
Door Window Sensor
SKU Code
ZW1101
Description
This sensor monitors door/window and send Z-Wave™ signal when door or window is opened and closed.
Version #
1.20.15 was the version certified
Certification #
ZC10-17035469
Certified
2016-10-06T13:58:42.428
Z-Wave Version
6.51.06

Security

As a Z-Wave Plus certified product, Door Window Sensor supports Z-Wave S2 security. The following security modes are directly supported:

    Features

    show home describes Door Window Sensor as having the following features:

    • Battery Quantity
    • Battery powered using CR14250 batteries
    • Color
    • Sensors
    • FLiRS capable
    • Supports Network Wide Inclusion
    • Supports Z-Wave Explorer Frames
    • Supports Z-Wave SmartStart allowing you to setup the product simply by scanning its QR code via

    Installation instructions

    Factory reset Door Window Sensor

    Press and hold the micro switch for at least 3 seconds while you insert the battery to reset the device.
    *Use this procedure only in the event that the network primary controller is missing or otherwise inoperable

    1. Follow the instructions for your Z-Wave certified controller to include a device to the Z-Wave network.
    2. Once the controller is ready to include your device, triple click the micro switch to include it in the network.

    1. Follow the instructions for your Z-Wave certified controller to exclude a device from the Z-Wave network.
    2. Once the controller is ready to Exclude your device, triple click the micro switch to exclude it from the network.

    The sensor was wake up when micro switch or magnetic sensor detect position changed after mounted on site.

    Please note that this is a user manual Door Window Sensor from show home is provided as is and without warranty; all information contained herein is provided by the manufacturer or the certifying body. The information provided is for reference only and is not intended to be used as a substitute for professional advice. ZWaveProducts.com only warrants and is only able to support products purchased directly from us. If you have Door Window Sensor and have not purchased it from us, please contact the manufacturer directly with any further questions you may have.