The following is an overview of the user manual for the Z-Wave product Outdoor Smart Plug - 1 channel (ZW96)from show home. To view other Z-Wave products and manuals from show home follow that link.
Overview
Security
As a Z-Wave Plus certified product, Outdoor Smart Plug - 1 channel supports Z-Wave S2 security. The following security modes are directly supported:
- S2 Unauthenticated
Features
show home describes Outdoor Smart Plug - 1 channel as having the following features:
- Electric Load Type
- Firmware updatable via a compatible Z-Wave gateway
- Switch Load Capacity Current
- Switch Load Capacity Watts
- Outdoor Use
- Supported Notification Types
- Color
- FLiRS capable
- Supports Network Wide Inclusion
- Supports Z-Wave Explorer Frames
- Supports Z-Wave SmartStart allowing you to setup the product simply by scanning its QR code via
Installation instructions
1:Refer to your primary controller instructions to process the inclusion / exclusion setup procedure.
2:When prompted by your primary controller, click the PROG button five times in one second.
1:Refer to your primary controller instructions to process the inclusion / exclusion setup procedure.
2:When prompted by your primary controller, click the PROG button five times in one second.
Factory reset Outdoor Smart Plug - 1 channel
---Power off ZW96
---keep holding the PROG button
---Power on,Press and keep holding the PROG button for no less than 10 seconds.
Please use this procedure only when the network primary controller is missing or otherwise inoperable.
Please note that this is a user manual Outdoor Smart Plug - 1 channel from show home is provided as is and without warranty; all information contained herein is provided by the manufacturer or the certifying body. The information provided is for reference only and is not intended to be used as a substitute for professional advice. ZWaveProducts.com only warrants and is only able to support products purchased directly from us. If you have Outdoor Smart Plug - 1 channel and have not purchased it from us, please contact the manufacturer directly with any further questions you may have.