The following is an overview of the user manual for the Z-Wave product Heating Thermostat (1000581X-13X)from Simon. To view other Z-Wave products and manuals from Simon follow that link.
Overview
Security
As a Z-Wave Plus certified product, Heating Thermostat supports Z-Wave S2 security. The following security modes are directly supported:
- S2 Unauthenticated
Features
Simon describes Heating Thermostat as having the following features:
- Thermostat HVAC Systems Supported
- Thermostat Modes
- Thermostat Power Source
- FLiRS capable
- Supports Network Wide Inclusion
- Supports Z-Wave Explorer Frames
- Supports Z-Wave SmartStart allowing you to setup the product simply by scanning its QR code via
Installation instructions
In normal working interface, press & hold S4 to enter interface for adding Z-Wave network. Before device added into network, “- - -” will display on the screen. Then press S4 once, device will enter learning mode to get a node ID. If adding is succeed, a node ID will display on the screen in a few seconds.
In normal working interface, press & hold S4 to enter interface for removing from Z-Wave network. Before device removed from network, node ID will display on the screen. Then press S4 once, device will remove from network. If removing is succeed,“- - -” will display on the screen in a few seconds.
Factory reset Heating Thermostat
In shutdown state, long press S3+S5 synchronically can enter into secret menu. Press S4 or S5 to enter code 1234. Touch S3 to enter setting interface. Choose P18, change 53 to 55, and press S3 to confirm.
Please note that this is a user manual Heating Thermostat from Simon is provided as is and without warranty; all information contained herein is provided by the manufacturer or the certifying body. The information provided is for reference only and is not intended to be used as a substitute for professional advice. ZWaveProducts.com only warrants and is only able to support products purchased directly from us. If you have Heating Thermostat and have not purchased it from us, please contact the manufacturer directly with any further questions you may have.