The following is an overview of the user manual for the Z-Wave product Gateway (2419D)from Smartly. To view other Z-Wave products and manuals from Smartly follow that link.
Overview
It has Z-Wave integrated, as well as internal USB extension connectors which may be used to expand the SGWs future abilities.
The Gateway is designed to reduce installation cost to a minimum. It can be installed on a DIN rail within the fuse cabinet, or externally on the wall.
Security
As a Z-Wave Plus certified product, Gateway supports Z-Wave S2 security. The following security modes are directly supported:
Features
Smartly describes Gateway as having the following features:
- FLiRS capable
- Supports Network Wide Inclusion
- Supports Z-Wave Explorer Frames
- Supports Z-Wave SmartStart allowing you to setup the product simply by scanning its QR code via
Installation instructions
BF Web interface; Z-Wave tab, ""Add Device""
BF Web interface; Z-Wave tab, ""Remove Device""
BF Web interface; Z-Wave tab > Advanced Operations, ""Learn mode""
Factory reset Gateway
BF Web interface; Z-Wave tab > Advanced Operations, ""Reset to default"".
Use the reset procedure only when the primary controller is missing or inoperable.
Please note that this is a user manual Gateway from Smartly is provided as is and without warranty; all information contained herein is provided by the manufacturer or the certifying body. The information provided is for reference only and is not intended to be used as a substitute for professional advice. ZWaveProducts.com only warrants and is only able to support products purchased directly from us. If you have Gateway and have not purchased it from us, please contact the manufacturer directly with any further questions you may have.