SAMSUNG Connect Home (ET-WV522) manual for Z-Wave

The following is an overview of the user manual for the Z-Wave product SAMSUNG Connect Home (ET-WV522)from Samsung Electronics, Co., Ltd.. To view other Z-Wave products and manuals from SmartThings follow that link.

  1. Overview
  2. Security
  3. Features
  4. Installation instructions


SAMSUNG Connect Home
SKU Code
A connected smart home hub used to control a variety of Z-Wave sensors for home automation.
Version #
HW: 24 FW: 4.38:00.17 was the version certified
Certification #
Z-Wave Version


As a Z-Wave Plus certified product, SAMSUNG Connect Home supports Z-Wave S2 security. The following security modes are directly supported:


    SmartThings describes SAMSUNG Connect Home as having the following features:

    • Communications Protocol
    • Supported Notification Types
    • Sensors
    • Controller Supports Multiple Networks
    • Color
    • Communications Connections
    • Gateway Has Preferred Partners
    • Controller Supports Multiple Z-Wave Interfaces
    • Z-Wave Scene Type
    • Firmware updatable via a compatible Z-Wave gateway
    • FLiRS capable
    • Supports Network Wide Inclusion
    • Supports Z-Wave Explorer Frames
    • Supports Z-Wave SmartStart allowing you to setup the product simply by scanning its QR code via

    Installation instructions

    Learn mode is activated from the app by going to the 'more menu' button, at the upper left of the Dashboard and then tapping ‘gear icon’ in the side menu. After tapping the gear to the right upper of the Location name, scrolling down to the Hubs section and tapping [Your hub] > Z-Wave Utilities > Join or Leave Existing Z-Wave Network

    The hub is put in network wide inclusion mode by tapping the ""+"", Tap ADD DEVICE MANUALLY and select a device category. And Select device maker. On the device you want to include, enter inclusion mode and complete the inclusion.

    Tap My devices and scroll the screen to the left of right to select a location. Tap →Edit→DELETE DEVICE. The hub is put in the network wide exclusion mode by tapping the My devices→SMARTTHINGS HUB. And upper right of the Dashboard and then tapping the →Z-Wave exclusion

    Factory reset SAMSUNG Connect Home

    If your Wi-Fi hub is frozen and unresponsive, inset a pin into the Reset hole. If you want to clear the location, Tap My Devices and Scroll the screen to the left or right to select a location. Tap →Edit and use the following option. Location name→REMOVE PLACE. If you reset the Wi-Fi hub, you should exclude the Z-Wave device and re-include it. For instructions on how to exclude Z-Wave devices, refer respective Z-Wave device’s user manual.

    Please note that this is a user manual SAMSUNG Connect Home from Samsung Electronics, Co., Ltd. is provided as is and without warranty; all information contained herein is provided by the manufacturer or the certifying body. The information provided is for reference only and is not intended to be used as a substitute for professional advice. only warrants and is only able to support products purchased directly from us. If you have SAMSUNG Connect Home and have not purchased it from us, please contact the manufacturer directly with any further questions you may have.