ONU Integrated Service Router (NSD-G1000TS) manual for Z-Wave

The following is an overview of the user manual for the Z-Wave product ONU Integrated Service Router (NSD-G1000TS)from Sony Network Communications Inc.. To view other Z-Wave products and manuals from SONY follow that link.

  1. Overview
  2. Security
  3. Features
  4. Installation instructions

Overview

Name
ONU Integrated Service Router
SKU Code
NSD-G1000TS
Description
NSD-G1000TS is a home gateway supporting IoT devices such as sensors are connected and can be controlled by this gateway.
Version #
HW: 01 FW: 07.15:07.15 was the version certified
Certification #
ZC14-22010054
Certified
2022-01-17T09:24:16
Z-Wave Version
7.15.4

Security

As a Z-Wave Plus certified product, ONU Integrated Service Router supports Z-Wave S2 security. The following security modes are directly supported:

  • S2 Access Control
  • S2 Authenticated
  • S2 Unauthenticated

Features

SONY describes ONU Integrated Service Router as having the following features:

  • Controller Supports Multiple Networks
  • Firmware updatable via a compatible Z-Wave gateway
  • Gateway Has Preferred Partners
  • FLiRS capable
  • Supports Network Wide Inclusion
  • Supports Z-Wave Explorer Frames
  • Supports Z-Wave SmartStart allowing you to setup the product simply by scanning its QR code via

Installation instructions

SmartStart location

SmartStart QR code's location as follows: DSK which is indicated on product label or shown as QR code that can be scanned via smartphone camera.
QR code is written on product label of the gateway with protection by fiber cover from the wonders of rubbing and dirt.

SmartStart installation

Select SmartStart in the GUI to perform SmartStart operation.
Select “Add Device” button to register the DSK which is indicated on product label or shown as QR code that can be scanned via smartphone camera.
The added device will be shown in the provisioning list.

Factory reset ONU Integrated Service Router

Select Network Manager>> Rest in the GUI to perform a reset to factory default operation.
If this controller is the primary controller for your network, resetting it will result in the nodes in your network being orphaned and it will be necessary after the reset to exclude and re-include all of the nodes in the network. If this controller is being used as a secondary controller in the network, use this procedure to reset this controller only in the event that the network primary controller is missing or otherwise inoperable.

Please note that this is a user manual ONU Integrated Service Router from Sony Network Communications Inc. is provided as is and without warranty; all information contained herein is provided by the manufacturer or the certifying body. The information provided is for reference only and is not intended to be used as a substitute for professional advice. ZWaveProducts.com only warrants and is only able to support products purchased directly from us. If you have ONU Integrated Service Router and have not purchased it from us, please contact the manufacturer directly with any further questions you may have.