The following is an overview of the user manual for the Z-Wave product Artis Cape (BBB Cape V1.0)from Stratis IoT. To view other Z-Wave products and manuals from Stratis IoT follow that link.
Overview
Hardware wise, the Artis cape offers a UART interface to a ZM5202 Z-Wave chip.
Security
As a Z-Wave Plus certified product, Artis Cape supports Z-Wave S2 security. The following security modes are directly supported:
Features
Stratis IoT describes Artis Cape as having the following features:
- FLiRS capable
- Supports Network Wide Inclusion
- Supports Z-Wave Explorer Frames
- Supports Z-Wave SmartStart allowing you to setup the product simply by scanning its QR code via
Installation instructions
This is a hardware platform that exposes the Z-Wave serial API. Please refer to the controlling software application's instructions for this feature.
This is a hardware platform that exposes the Z-Wave serial API. Please refer to the controlling software application's instructions for this feature.
This is a hardware platform that exposes the Z-Wave serial API. Please refer to the controlling software application's instructions for this feature.
Factory reset Artis Cape
This is a hardware platform that exposes the Z-Wave serial API. Please refer to the controlling software application's instructions for this feature.
Please note that this is a user manual Artis Cape from Stratis IoT is provided as is and without warranty; all information contained herein is provided by the manufacturer or the certifying body. The information provided is for reference only and is not intended to be used as a substitute for professional advice. ZWaveProducts.com only warrants and is only able to support products purchased directly from us. If you have Artis Cape and have not purchased it from us, please contact the manufacturer directly with any further questions you may have.