The following is an overview of the user manual for the Z-Wave product TellStick ZNet Lite (TZNetLite)from Telldus. To view other Z-Wave products and manuals from Telldus follow that link.
Overview
This Z-Wave gateway with built-in 433 MHz transmitter combines the best of two worlds. Z-Wave provides high reliability, long range and two-way communication while 433 MHz provides broad compatibility.
All configuration for the gateway is made in our cloud service, Telldus Live!. Schedules can be made at fixed times or depending on the sunrise and sunset. Event enabled control from incoming signals or sensors allows you to automate your home for real. The additional service Telldus Live! Pro gives you additional features, such as the ability to receive an e-mail or SMS when things happen in your system, such as data from a thermo or motion sensor. Schedules and Events runs locally on TellStick ZNet Lite even if internet is not available. The smartphone app Telldus Live! Mobile makes it possible to use your mobile phone as a remote control to the devices in your home, wherever you are in the world.
Security
As a Z-Wave Plus certified product, TellStick ZNet Lite supports Z-Wave S2 security. The following security modes are directly supported:
Features
Telldus describes TellStick ZNet Lite as having the following features:
- FLiRS capable
- Supports Network Wide Inclusion
- Supports Z-Wave Explorer Frames
- Supports Z-Wave SmartStart allowing you to setup the product simply by scanning its QR code via
Installation instructions
Navigate to the device page in Telldus Live!.
http://live.telldus.com/device/index
Click on the + icon
Select the Z-Wave logo and follow on-screen instructions.
Click the device that should be removed.
Click Edit device.
Click Exclude device.
If the device is not included in the network or you don't have any devices:
Navigate to the profile page in Telldus Live!.
http://live.telldus.com/profile/index
Click on the gateway
Click Change settings
Click Z-Wave settings
Click Exclude any device
Check the manual for the specific product how to exclude the device.
Navigate to the profile page in Telldus Live!.
http://live.telldus.com/profile/index
Click on the gateway
Click Change settings
Click Z-Wave settings
Set the primary controller into add mode.
Click “Start learn mode”.
TellStick ZNet Lite will now be included into the other Z-Wave network.
Factory reset TellStick ZNet Lite
Navigate to the profile page in Telldus Live!.
http://live.telldus.com/profile/index
Click on the location
Click Change settings
Click Z-Wave settings
Click Reset controller
Please note! Only use the reset procedure when the primary controller is missing or inoperable.
Please note that this is a user manual TellStick ZNet Lite from Telldus is provided as is and without warranty; all information contained herein is provided by the manufacturer or the certifying body. The information provided is for reference only and is not intended to be used as a substitute for professional advice. ZWaveProducts.com only warrants and is only able to support products purchased directly from us. If you have TellStick ZNet Lite and have not purchased it from us, please contact the manufacturer directly with any further questions you may have.