The following is an overview of the user manual for the Z-Wave product Smart (HY-15-05A)from TIMEVALVE. To view other Z-Wave products and manuals from TIMEVALVE follow that link.
Overview
Security
As a Z-Wave Plus certified product, Smart supports Z-Wave S2 security. The following security modes are directly supported:
Features
TIMEVALVE describes Smart as having the following features:
- FLiRS capable
- Supports Network Wide Inclusion
- Supports Z-Wave Explorer Frames
- Supports Z-Wave SmartStart allowing you to setup the product simply by scanning its QR code via
Installation instructions
To enter learn mode(inclusion), press UP arrow for 5 seconds while the valve is open.
To enter learn mode(exclusion), press UP arrow for 5 seconds while the valve is open.
Factory reset Smart
To reset, Press DOWN arrow for 5 seconds while the valve is open.
Please use this procedure only in the event that the network primary controller is missing or otherwise inoperable.
Please note that this is a user manual Smart from TIMEVALVE is provided as is and without warranty; all information contained herein is provided by the manufacturer or the certifying body. The information provided is for reference only and is not intended to be used as a substitute for professional advice. ZWaveProducts.com only warrants and is only able to support products purchased directly from us. If you have Smart and have not purchased it from us, please contact the manufacturer directly with any further questions you may have.